Star Trac 7600, 7700 manual Europe, Asia/Middle East, Español

Page 2

Service Manual: E-TR and E-TRi

INTRODUCTION

This is the Service Manual for the Star Trac AC Pro Tread 7600 & 7700. This manual is designed to be easy to use, providing detailed instructions on how to service and maintain the AC treadmills.

Star Trac highly recommends that you read the entire manual prior to performing any maintenance or repair. The information on the following pages will enable you to begin easily, quickly and safely.

This is not an Owners Manual. This service manual is intended for use by a qualified technician as a guide to diagnose and repair service issues on the referenced product.

If you have any questions or require additional assistance, contact the Star Trac Customer Service department during regular hours of operation.

Star Trac Customer Support contact information:

USA

Hours: Monday thru Friday (excluding U.S. holidays)

Check the support website for operating hours and holiday schedule

Toll Free: 800-503-1221

Tel: 714-669-1660

Fax: 714-669-0739

Website: http://support.startrac.com

Email: support@startrac.com

Europe

Hours: Monday thru Friday

(excluding U.K. holidays)

Tel: +44 (0) 1494-688264

Fax: +44 (0) 1494-688268 Website: http://support.startrac.com

Email: EuropeSupport@startrac.com

Asia/Middle East

Hours:

Monday thru Friday

 

(excluding Asia/M.E. holidays)

Tel:

+65-6225-6252

Fax:

+65-6225-1501

Website:

http://support.startrac.com

Email:

AsiaSupport@startrac.com

Email:

MiddleEastSupport@startrac.com

Español

Hours:

Monday thru Friday

 

(excluding U.S. holidays)

Tel:

714-669-1660

Fax:

714-669-0739

Website:

http://support.startrac.com

Email:

ServiciosEnEspanol@startrac.com

1

Service Manual: E-TR and E-TRi

Image 2
Contents Pro Tread AC 7600 Español EuropeAsia/Middle East Table of Contents Maintenance Mode Page Precautions Safety Electrical SafetyEquipment Placing Power Electricity ObjectivesEuropean Wire Wire ConfigurationsUSA Wire HOT Neutral GroundPower Cords Preventive Maintenance OverviewPreventive Maintenance Schedule Daily Weekly Monthly Running Belt Importance of Running Belt Maintenance Running Belt Do Not’sClean Belt Surface Cleaning a Running BeltCleaning Procedure Clean Between Deck & Belt Clean Sidebed CoversTools Required Running Belt TensionParts Required FrequencyRunning Belt Retension Procedure Be careful to ensure the Tail Roller does not Running Belt Alignment Roller do NOT’s Roller Care & MaintenanceCleaning Step Applying Wax to a Waxless Running BeltParts Required Step Maintenance Mode Engaging Maintenance ModeMaintenance Mode Keys Parameter Defaults Display ParametersNo Rail Stop Parameter Setting Definitions SPEED3 Check with a Star Trac sales representative for definitions Maintenance Mode Test Modes Display TestCalibrate Scale Csafe Test Maintenance Mode Auto Calibration Auto-CalibrationLast Error List Definitions Last StatDFR’s Drive Fault Records DFR InformationSoftware Display UploadersSoftware Required on your PC Time RequiredTools Required Obtaining the Fisp and Latest Software Extracting Unzipping the Zip Files Connecting the USB Cable to the PC If a ‘Security Warning’ window appears Click ‘Run’ Uploading the Software into the Uploader Project Change PointReturn to Project Change Point Software MCB Set Up Procedure for Programming mode Uploading Software into the AC MCB with MCB UploaderPage Setting Back To Run Mode Uploading to the MCBPage Part Replacement Procedures Running Belt Tensioning Procedure Frequency Recommended Preventative MaintenanceStep When finished, remove the tape from the running belt Toll Free 714-669-1660 Tel Troubleshooting Table Of Troubleshooting DocumentsCheck Speed System and Check Motor System DFR Code 1000000, 100000 DFR Code DFR Code DFR Code 800 DFR Flowchart For # DFR Code 40, 20 DFR Remaining Codes Slipping Running Belt This page intentionally left blank Doc Rev B