Star Trac 7600, 7700 manual Toll Free 714-669-1660 Tel

Step 1

Start the treadmill and set the speed to 3.0 mph (5.0 kph). Make sure the running belt tracks to the center (see Fig 7).

If the running belt shifts or tracks to either side (left or right), follow the appropriate procedure below.

Fig 7

If the belt tracks to the LEFT side:

Turn the LEFT bolt ¼	Turn the RIGHT bolt ¼
turn	turn
clockwise	counter-clockwise

If the belt tracks to the RIGHT side:

Turn the LEFT bolt ¼	Turn the RIGHT bolt ¼
turn	turn
counter-clockwise	clockwise

Repeat above steps until the running belt tracks in the center

Note that the above drawings are not to scale and have been exaggerated to better show an offset tracking.

If you have any questions or concerns STOP and contact Star Trac immediately!

800-503-1221 Toll Free ￿ 714-669-1660 Tel

54 Service Manual: E-TR and E-TRi