NordicTrack NTL16905.1 user manual Wire Small Screws Cylinder

Page 10

If you purchase the optional chest pulse sensor (see page 24), follow the steps below to install the re- ceiver included with the chest pulse sensor.

1.Make sure that the power cord is unplugged. Remove the indicated Screw (13) and the Access Door (70) from the bottom of the Console Base (65).

2.Connect the wire on the receiver (A) to the indicated wire extending from the Console Base (65). Hold the re- ceiver so the small cylinder is oriented as shown. Attach the receiver to the plastic posts on the Access Door (70) with the two included small screws.

3.Make sure that no wires are pinched. Reattach the Access Door (70) with the Screw (13). The other wires in- cluded with the receiver may be discarded.

65
Wire
A	Small
A	Screws
Small
Cylinder
13	70

10

Image 10

Contents Model No. NTL16905.1 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Back Before YOU BeginFront Right SideAssembly Page 102 Page Wire Small Screws Cylinder Features of the Console To use an iFIT card, seeTreadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt HOW to Turn on the Power HOW to Personalize Console SettingsPage HOW to USE the Manual Mode Turn on the fan if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove Select a Cardio program HOW to USE a Cardio ProgramPress the Start button to start the program HOW to USE a Calorie Program Select a Calorie programHOW to Create a Record Program Select a Record programHOW to USE a Record Program Adjust the maximum target heart rate setting if Desired HOW to USE a Pulse ProgramSelect a Pulse program Turn on the fan if desired HOW to USE AN Ifit Card Insert an iFIT Card and select a programHOW to Adjust the Cushioning System Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Gap between the Magnet and the Reed Switch isTop Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0806A Qty DescriptionHOW to Order Replacement Parts Exploded DRAWING-Model No. NTL16905.1 100 102 109 Limited Warranty