A S S E M B LY STEP 2
HARDWARE BAG 2 CONTENTS : |
| A | Open HARDWARE BAG 2. | ||
|
|
| BOLT (B) | ||
|
|
| B | With running deck in lowered | |
|
|
| |||
|
|
| 15 mm | ||
|
|
| Qty: 4 |
| position, pull CONSOLE CABLE |
|
|
|
| ||
|
|
|
|
| through right side handlebar . |
|
|
|
|
|
|
IMPORTANT PRECAUTIONS INTRODUCTION
CONSOLE |
CONSOLE CABLES |
BOLTS (B) |
UPRIGHT MAST |
CSlide CONSOLE onto the top brackets of the upright masts.
DConnect CONSOLE CABLES, carefully tucking wires in masts to avoid damage.
ETo connect CONSOLE to UPRIGHT MASTS, place 4 BOLTS
(B) into holes in CONSOLE
and tighten. Partially thread all bolts before completely tightening any one bolt.
ASSEMBLY
BEFORE YOU BEGIN
* Be sure to tighten bolts after all are lined up.
* Note: Be careful not to pinch any wires while assembling the masts.
TREADMILL OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES