Horizon Fitness CT12.1 owner manual Assembly Step, Pull lead wire through right console

ASSEMBLY STEP 1
	HARDWARE BAG 1 CONTENTS :		A	Cut the yellow banding straps and lift the
				running deck upward to remove all contents
BOLT (A)	SPRING WASHER (B)	ARC WASHER (C)		from underneath the running deck.
20 mm	8.2 mm	8.2 mm	B	Open hardware bag 1.
Qty: 6	Qty: 6	Qty: 6
			C	Slide main frame boot up console
	LEAD WIRE			mast. Place right console mast over
				main frame bracket.
			D	Pull lead wire through right console
				mast. After pulling the lead wire through
				the mast, the top of the console cable
				should be located at the top of the mast. Detach
				and discard lead wire.
CONSOLE MAST				Note: Do not pinch console cable when
MAIN				placing the mast onto the main frame
				bracket.
FRAME
BOOT	CONSOLE CABLE
			E	Attach console mast to main frame
BOLTS (A)				bracket using 3 bolts (a), 3 spring
SPRING				washers (b) and 3 arc washers (c).
WASHERS (B)			F	Slide main frame boot down over main
ARC WASHERS (C)
				frame bracket.
MAIN FRAME BRACKET			G	Repeat steps D–F on other side.
10