Spirit XT685 Mile Track, Pulse Grip Feature, Calorie Display, Speakers, To Turn Treadmill Off

1/4 Mile Track

The 1/4-mile track (one lap) will be displayed around the dot matrix window.The flashing segment indicates your progress. Once the 1/4-mile (Metric - 0.4k) is complete this feature will begin again.There is a lap counter in the message window for monitoring your distance.

Pulse Grip Feature

The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout.You must use both stainless steel sensors on the front cross bar or the heart rate transmitter chest strap to display your pulse. Pulse value displays anytime the upper display is receiving a Pulse signal.You may not use the Grip Pulse feature while in Heart Rate Programs.

Note: Refer to Important Safety Instructions (page 2) concerning Pulse Grip operation.

Calorie Display

Displays the cumulative calories burned at any given time during your workout.

Note:This is only a rough guide used for comparison of different exercise sessions, which cannot be used for medical purposes.

Speakers

The console has built-in Speakers.You may plug an Audio Source (CD player, MP3, Computer, etc.) into the Jack on the right side of console.There is no volume control on the console.The volume must be controlled on the Audio Source.

Handrail Buttons Disable Switch

To the right of the Stop button there is a Handrail control switch and an indicator light next to it When the indicator light is lit, the handrail switches are disabled.This allows you to use the full length of the handrails without fear of activating the speed or elevation controls.

To Turn Treadmill Off

1.Display will automatically turn off (go to sleep) after 30 minutes (no key

operations).The treadmill will draw very little current in sleep mode (about as much as your television when it is turned off).

2.Remove the tether cord.

3.Turn off the main switch on the front of the treadmill, below the motor cover.