![](/images/new-backgrounds/1145696/14569615x1.webp)
Important Operation Instructions
NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired work level on the computer console and release the adjustment key.The computer will obey the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that could damage treadmill components. Unplug the treadmill during an electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as watching television, reading, etc.These distractions may cause you to lose balance which may result in serious injury.
Do not use excessive pressure on console control keys.They are precision set to function properly with little finger pressure.
Safety Tether Cord
A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the
movement.To Use:
1.Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.
2.Fasten the plastic clip onto your clothing securely to assure good holding power. Note:The magnet has strong enough power to minimize accidental, unexpected stopping.The clip should be attached securely to make certain it does not come off. Be familiar with its function and limitations.The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the Stop / Pause switch in normal operation.
XT685 Treadmill | 4 |