Bodyguard T560, T360 manual Speed Run Program, Track Program

Speed Run Program

The Speed Run program like the Hill Climb program controls a certain parameter. Speed Run is speed changes. Selecting a higher level will default a higher speed profile. Elevation changes are user controlled.

The speed will change as you progress into the program. Changing the speed or elevation manually will cause the rest of the program to change.

To select the Speed Run program:

1.Press the DECREASE key to select Speed RUN. Press the JustGoTM/ENTER key to accept the Speed Run program.

2.Select your weight. Press the speed INCREASE or DECREASE keys to select the appropriate weight. The weight will vary from 50 to 400 pounds (23 to 182 kilograms). Press the JustGoTM/ENTER key to accept.

3.Select the exercise duration. Press the speed INCREASE or DECREASE keys to select the appropriate exercise duration. Press the JustGoTM/ENTER key to accept.

4.Select the exercise level by pressing the speed INCREASE or DECREASE keys. The higher the level, the greater the speed will be during the program. Press the JustGoTM/ENTER key to accept and start the exercise.

Level	Speed (mph)	Speed (km/h)	Elevation (%)
1	1.0 to 4.0	1.6 to 6.4	0.0
2	1.0 to 5.0	1.6 to 8.0	0.0
3	2.0 to 6.0	3.2 to 9.6	0.0
4	3.0 to 7.0	4.8 to 11.2	0.0
5	4.0 to 8.0	6.4 to 12.8	0.0

Track Program

The Track program is one that enables you to choose from 1-99 laps of a 400 Meter (or about a 1/4 mile) Olympic track. Each Track program allows the user to completely control their speed from the start of the exercise until the end since there is no automatic speed control during the Track program.

The Track program will display an oval track screen that will show your progression on the track. The central information window will show you how many laps have been done in your workout. Elevation although not usually found on any track can be used on the T360 – T560.

To select the Track program :

SELECT

2

3

SPEED

DISTANCE

ELEVATION

CALORIES

CAL / HOUR

HEART RATE

ELAPSED TIME

TARGET REMAINING

PACE

figure 8

1.Press the DECREASE key to select TRACK. Press the JustGoTM/ ENTER key to accept the Track program.

2.Select your weight. Press the speed INCREASE or DECREASE keys to select the appropriate weight. The weight will vary from 50 to 400 pounds (23 to 182 kilograms). Press the JustGoTM/ ENTER key to accept.

3.Select the number of laps. Press the speed INCREASE or DECREASE keys to select the appropriate number of laps. Press the JustGoTM/ ENTER key to accept.

4.To commence the exercise, press the JustGoTM/ENTER key. A three second countdown will appear on the screen before the running belt starts moving. Remember, that at the start of this exercise, the speed will always start at 0.5 mph (0.8 km/h). You must press the Speed INCREASE or DECREASE keys if you wish to change the speed during the exercise.

20