Healthrider HRTL20510.1 manual

Page 12

11.With the help of a second person, hold the Left and Right Handrails (81, 82) near the Base (91). Insert the lower ends of the Handrails into the holes in the top of the Right Base Cover (84) and the Left Base Cover (not shown).

12.With the help of a second person, hold the handrail assembly near the Left and Right Uprights (88, 89) and connect the two pulse wires. Carefully set the handrail assembly on the console assembly. Make sure that the brackets on the handrail assembly sit entirely on top of the metal uprights and do not sit on top of the plastic console assembly. Also, be careful not to pinch the pulse wires.

Attach the handrail assembly to the Uprights (88, 89) with four 3/8" x 4 1/2" Patch Screws (5) and four 3/8" Star Washers (13) (only one side is shown); do not tighten the Patch Screws yet.

Then, attach the handrail assembly with two 5/16" x 1 1/2" Patch Screws (15); do not tighten the Patch Screws yet.

Tighten the four 5/16" x 1 1/4" Patch Screws (4).

11

81

82

84

 

91

 

 

 

 

12

 

 

 

Handrail

 

 

4

Assembly

 

 

 

 

 

 

Pulse

 

 

 

Wires

13

4

Console

15

Assembly

88

 

5

 

89

 

 

 

12

Image 12
Contents QUESTIONS? Model No. HRTL20510.1 Serial NoMon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Part Identification Chart Assembly Assembly requires two personsIng materials until you finish assembly Packing materials. Do not dispose of the packSee the inset drawing. Tie the wire tie Upright 88 do not fully tighten the PatchAttach the Right Upright not shown Page Tie s Bracket Pulse Wire Page Side is shown do not tighten the Patch Screws yet Raise the Frame 57 to the position shown Page HOW to USE the Chest Pulse Sensor HOW to PUT on the Chest Pulse SensorCare and Maintenance TroubleshootingOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to SET UP the ConsoleHOW to USE the Manual Mode Begin working outInsert the key into the console Page COOL-DOWN Mode Measure your heart rate if desiredTurn on the fan if desired HOW to USE AN Onboard Workout Start the workoutHOW to USE AN Ifit Live Workout Ifit Live FCC Information HOW to USE the Internet Browser HOW to USE the Settings Mode Select the wireless network modeExit the settings mode Log in to your iFit Live accountSelect a language Select the unit of measurementHOW to USE the Maintenance Mode Select the settings mode. See on Select the maintenance modeView technical information HOW to USE the Stereo Sound System HOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The iFit Live mode does not function correctly Symptom The walking belt slows when walked onPage Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT