Healthrider HRTL20510.1 manual HOW to USE the Settings Mode, Select the wireless network mode

Page 27

HOW TO USE THE SETTINGS MODE

The console features a settings mode that allows you to connect the treadmill to your own wireless network and to log in to your iFit Live account. The settings mode also allows you to select the unit of measure- ment and to turn on and turn off the display demo mode. You may also be able to select a language.

1.Select the settings mode. Insert the key into the console (see step 1 on page 20). Next, select the main menu (see

step 2 on page 20). Then, touch the i button near the lower right cor-

ner of the screen to select the settings mode.

2.Select the wireless network mode.

If desired, touch the Wireless Network button on the screen. Note: It may take a few moments for the list of wireless networks to appear.

Note: You must have your own wireless network and an 802.11b/n router with SSID broadcast en- abled (hidden networks are not supported).

Make sure the WiFi checkbox near the upper right corner of the screen is marked with a green check- mark. If it is not, touch the checkbox once and wait for a few seconds. The console will search for available wireless networks.

When a list of networks appears, touch the desired network. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password.

An information box will ask if you want to connect to the wireless network. Touch the Connect button to connect to the network or touch the Cancel but- ton to return to the list of networks. If the network has a password, touch the password entry box. A keyboard will appear on the screen. To view the password as you type it, touch the Show Password checkbox.

To use numbers or other characters on the key- board on the screen, touch the .?123 button. To view more characters, touch the Alt button. Touch the Alt button again to return to the number key- board. To return to the letter keyboard, touch the ABC button. To view capital characters, touch the button with an upward-facing arrow. To return to the lowercase keyboard, touch the arrow button again. To clear the last character, touch the button with a backward-facing arrow and an X.

When the console has connected to your wireless network, the WiFi box at the top of the screen will display the word CONNECTED. Then, touch the Home button on the console to return to the set- tings mode.

To disconnect from a wireless network, select the wireless network and touch the Forget button.

If you are having problems connecting to an en- crypted network, make sure your password is cor- rect. Note: Passwords are case-sensitive.

Note: The iFit Live mode supports unsecured and secured (WEP, WPA, and WPA2) encryption. A broadband connection is recommended; perfor- mance depends on connection speed.

Note: If you have questions after following these instructions, go to www.iFit.com/support for assistance.

27

Image 27
Contents On the WEB QUESTIONS?Model No. HRTL20510.1 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Instructions Save TheseBefore YOU Begin Part Identification Chart Packing materials. Do not dispose of the pack AssemblyAssembly requires two persons Ing materials until you finish assemblySee the inset drawing. Tie the wire tie Upright 88 do not fully tighten the PatchAttach the Right Upright not shown Page Tie s Bracket Pulse Wire Page Side is shown do not tighten the Patch Screws yet Raise the Frame 57 to the position shown Page Troubleshooting HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Care and MaintenanceOperation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to SET UP the Console HOW to Turn on the PowerHOW to USE the Manual Mode Begin working outInsert the key into the console Page COOL-DOWN Mode Measure your heart rate if desiredTurn on the fan if desired Start the workout HOW to USE AN Onboard WorkoutHOW to USE AN Ifit Live Workout Ifit Live FCC Information HOW to USE the Internet Browser Select the wireless network mode HOW to USE the Settings ModeSelect the unit of measurement Exit the settings modeLog in to your iFit Live account Select a languageSelect the settings mode. See on Select the maintenance mode HOW to USE the Maintenance ModeView technical information HOW to USE the Stereo Sound System HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Symptom The iFit Live mode does not function correctlyPage Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part ListQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT