Healthrider HRTL20510.1 manual Raise the Frame 57 to the position shown

Page 14

15.IMPORTANT: See page 17 and plug in the power cord. Next, see page 19 and turn on the power.

See page 29; follow steps 1 through 3 to cal- ibrate the incline of the treadmill.

When the frame stops moving, remove the key from the console and unplug the power cord.

 

15

 

 

IMPORTANT:

 

 

 

 

 

 

 

 

 

Make sure to follow all

 

 

 

 

 

instructions in this step.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16.Raise the Frame (57) to the position shown.

Have a second person hold the Frame until this step is completed.

Orient the Storage Latch (58) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (58) to the Base (91) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12).

Attach the upper end of the Storage Latch (58) to the bracket on the Frame (57) with a 3/8" x

1 3/4" Patch Bolt (6) and a 3/8" Nut (12). Note: It may be necessary to move the Frame back and forth to align the Storage Latch with the Frame.

16

57

 

 

 

12

6

 

Latch

 

 

Knob

 

58

Large

 

Barrel

 

 

91

12

3

14

Image 14
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. HRTL20510.1 Serial No On the WEBTable of Contents Important Precautions Save These InstructionsBefore YOU Begin Part Identification Chart Ing materials until you finish assembly AssemblyAssembly requires two persons Packing materials. Do not dispose of the packAttach the Right Upright not shown See the inset drawing. Tie the wire tieUpright 88 do not fully tighten the Patch Page Tie s Bracket Pulse Wire Page Side is shown do not tighten the Patch Screws yet Raise the Frame 57 to the position shown Page Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor TroubleshootingPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to SET UP the ConsoleInsert the key into the console HOW to USE the Manual ModeBegin working out Page Turn on the fan if desired COOL-DOWN ModeMeasure your heart rate if desired HOW to USE AN Onboard Workout Start the workoutHOW to USE AN Ifit Live Workout Ifit Live FCC Information HOW to USE the Internet Browser HOW to USE the Settings Mode Select the wireless network modeSelect a language Exit the settings modeLog in to your iFit Live account Select the unit of measurementHOW to USE the Maintenance Mode Select the settings mode. See on Select the maintenance modeView technical information HOW to USE the Stereo Sound System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The iFit Live mode does not function correctly Symptom The walking belt slows when walked onPage Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Key No. Qty DescriptionQty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty