Tunturi E4R owner manual Transport and Storage, Maintenance

Page 12

O W N E R ’ S M A N U A L • E 4 R

TELEMETRIC HEART RATE MEASUREMENT

The most reliable way of measuring the heart rate is telemetric measurement using a transmitter belt.

If you want to measure your heart rate this way during your workout, moisten the grooved electrodes on the transmitter belt with saliva or water. Fasten the transmitter just below the chest with the elastic belt, firmly enough so that the electrodes remain in contact with the skin while pedaling, but not so tight that normal breathing is prevented. If you wear the transmitter and belt over a light shirt, moisten the shirt slightly at the points where the electrodes touch the shirt. The transmitter automatically transmits the heart rate reading to the meter up to a distance of about 1 meter. The heart rate value is displayed in the meter. Follow your heart rate during the training.

REMARKS ON TELEMETRIC MEASUREMENT

If the electrode surfaces are not moist, the heart rate reading will not appear on the display. If the electrodes are dry, they must be moistened again. Allow the electrodes to warm up properly to ensure accurate heart rate measurement.

If there are several telemetric heart rate measurement equipment next to each other, the distance between them should be at least 1.5 m. Similarly, if there is only one receiver and several transmitters in use, only one person with a transmitter should be within transmission range. The transmitter is switched to an active state only when it is being used for measurement. Sweat and other moisture can, however, keep the transmitter in an active state and waste battery energy. Therefore it is important to dry the electrodes carefully after use.

When selecting training attire, please note that some fibers used in clothes (e.g. polyester, polyamide) create static electricity, which may prevent reliable heart rate measurement.

Please note that a mobile phone, television and other electrical appliances form an electro- magnetic field around them, which will cause problems in heart rate measurement.

TRANSPORT AND STORAGE

Please follow these instructions when carrying and moving the cycle about, because lifting it incorrectly may strain your back or risk other accidents:

NOTE! Always switch the power off and unplug the power cord before you start moving the equipment around! Transport the equipment with extreme caution over uneven surfaces, for example over a step. The equipment must never be transported upstairs using the wheels over the steps, instead it must be carried. Place the equipment on a firm, level surface, and on a protective base to avoid any damages to the floor beneath the equipment. Notice that certain floor materials may require protection when transporting the equipment.

Move the recumbent cycle according to the following instruction: stand behind the cycle and take it by the seat frame with one hand and by the handlebar with the other hand. Lift the E4R so that it rests on the transport wheels and move it by wheeling. Lower the cycle on the floor while holding on to it and remaining all the time behind the equipment.

To prevent the equipment malfunctioning, store in a dry place with as little temperature variation as possible and protected from dust.

MAINTENANCE

The equipment requires very little maintenance. Check, however, from time-to-time that all screws and nuts are tight.

•After exercising, clean the equipment with a soft, absorbent cloth. Do not use solvents. Sweat may cause corrosion: we recommend therefore that you protect all metal surfaces outside the plastic covers with teflon or car wax.

•Never remove the equipment’s protective casing.

•The magnetic brake forms a magnetic field that may damage the mechanism of a watch, or the magnetic identification strip on a credit or cash card, should they come into immediate contact with the magnets. Never attempt to detach or remove the magnetic brake!

•The magnetic brake is based on magnetic resistance; resistance level is electronically measured and shown as watt reading on the display. Due to the measurement system, your Tunturi ergometer need not be re-calibrated when assembled, serviced and used according to this Owner’s Manual.

•If the equipment is not used for a period

of time, the transmission belt may become temporarily distorted. This can lead to a sensation of slightly uneven pedaling. However,

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents E4R Contents Save this Welcome to the World Tunturi ExercisingAssembly Feet Meter Meter Operating the MeterManual Enter Exercise Exercising with a Recumbent Ergometer Maintenance Transport and StorageTechnical Specifications Inhalt Herzlich Willkommen in DER Welt DES Trainierens MIT Tunturi Montage Vorderer Teil DES Rahmens Elektronikanzeige Funktionen Die Besonderheit beim Programm T R I E B S a N L E I T U N G E 4 R Trainieren Training MIT DEM Recumbent Cycle Ergometer E4R Transport UND Lagerung Wartung Technische DatenTable DES Matieres Bienvenue Dans LE Monde DE ’ENTRAINEMENT Tunturi Assemblage Retirer l’adhésif du fil sortant du tube du Pedales Unite DES Compteurs Quick StartFonctions Programs Profils Preprogrammes ’ENTRAINER Entraînement Avec ’ERGOMÈTRE SEMI-COUCHÉ Mesure DU Pouls Transport ET Rangement Caracteristiques TechniquesD E D ´ E M P L O I E 4 R Indice SEI Benvenuto NEL Mondo Degli Allenamenti Tunturi MontaggioManubrio E Sedile Sedile E Schienale Pannello Funzioni Programs Profili DI Esercizio Preimpostati Training Allenamento CON LA Recumbent Rilevazione Delle Pulsazioni Trasporto E Immagazzinaggio ManutenzioneDati Tecnici Informacion Y Precauciones Bienvenido AL Mundo Tunturi DEL Ejercicio MontajeManillar Y Asiento Asiento Trasero Contador Funciones Funcion Programs Perfiles DE Ejercicio Ejercicios Ejercicio CON Bicicleta Reclinable Medida DEL Pulso Transporte Y Almacenamiento MantenimientoDatos Tecnicos N U a L D E L U S a R I O E 4 R Inhoud Welkom in DE Wereld VAN Tunturitraining Handgreep EN Zitting Framedelen Aansluiten Monitor Functies Manual ProgrammaPrograms Fitness Training Beginnen MET Trainen Training MET DE Ligfietstrainer Verplaatsen OnderhoudTechnische Gegevens Innehåll Välkommen Till Tunturis Träningsvärld MonteringHandstöd OCH Sadel Ryggstöd Mätare Funktioner AV Mätaren Programs Träningsprofiler Träningen ATT Träna MED EN Recumbent Transport OCH Förvaring Underhåll Tekniska DataSisällysluettelo Tervetuloa Tunturi Kuntoilijoiden Joukkoon AsennusKäsituki JA Istuin Selkänoja Mittari Mittarin Toiminnot Harjoitusprofiilit Programs Harjoittelu Harjoittelu E4R Rekumbentilla Pulssinmittaus Käsiantureiden Avulla Kuljetus JA Säilytys HuoltoTekniset Tiedot E4R Page E4R 583

E4R specifications

The Tunturi E4R is a premium recumbent exercise bike designed for fitness enthusiasts looking for a comfortable and effective workout experience. Blending innovative technology with user-friendly features, the E4R caters to individuals of all fitness levels, making it an ideal choice for home gyms.

One of the standout features of the Tunturi E4R is its ergonomic design. The recumbent position allows users to engage in their workouts while minimizing strain on the back and joints. The adjustable seat provides excellent lumbar support, ensuring a comfortable posture during extended use. The step-through frame design enhances accessibility, making it easy for users of all ages and physical conditions to get on and off the bike with ease.

The E4R is equipped with a sophisticated console that showcases a large, easy-to-read display. This LCD screen provides valuable real-time feedback on key metrics such as time, speed, distance, calories burned, and heart rate, allowing users to track their progress effectively. The bike also features built-in Bluetooth connectivity, enabling integration with fitness apps, which enhances the overall workout experience.

When it comes to performance, the Tunturi E4R boasts a high-quality magnetic resistance system. This technology ensures a smooth and quiet ride, providing users with up to 32 resistance levels to choose from. Such a wide range of options allows for customization of workouts, accommodating both beginners and more advanced users seeking to challenge themselves further.

Additionally, the E4R comes with multiple pre-set workout programs designed to cater to various fitness goals, including weight loss, endurance training, and interval training. These programs keep workouts engaging and can help users stay motivated. The bike is also equipped with heart rate sensors located in the handgrips, which allow for convenient monitoring of cardiovascular performance during exercises.

The Tunturi E4R is designed with durability in mind. The robust construction can withstand rigorous use, and the maintenance-free components ensure longevity, making it a worthwhile investment for fitness enthusiasts. Compact in design yet feature-rich, the E4R fits seamlessly into any home gym setup while delivering a premium workout experience.

In conclusion, the Tunturi E4R recumbent exercise bike combines comfort, performance, and advanced technology, making it an excellent choice for anyone looking to incorporate effective cardiovascular workouts into their fitness routine. With an ergonomic design, a variety of resistance levels, and engaging workout programs, the E4R stands out as a versatile and high-quality fitness machine.
Top Page Image Contents