VDO Cyclecomputing Z3 PC-LINK manual Manual delete of training data is not possible, Bar

Page 48

INSTRUCTION MANUAL

-All pulse data (only under certain conditions in walk mode)

-Lap data if lap timer is used

-All cadence data (if the cadence kit is installe

Note:

If you are using the lap timers the lap data will have a flag. When trans- ferring data from the computer to the PC the lap data are identified via this flag and are displayed and analyzed separately in the PC-Sport program.

IMPORTANT INFORMATION PLEASE NOTE THE FOLLOWING:

a. The storage capacity of the device is configured for a total of 100 training hours.

b. After this total time is exceeded the new data automatically over- writes the oldest data in the memory.

c. A manual delete of training data is not possible.

d. Due to the recording interval of 10 or 20 sec. there may be slight deviation between the data in your VDO computer and the data in the PC-Sport program (e.g. average pulse)

TIPP: Connect your VDO computer to your PC at regular intervals so that important data is not overwritten. Manual control/read out of the data records of the DATA RECORDING and a data delete is not possible on your VDO computer itself.

15.1.STARTING/STOPPING DATA RECORDING You must start data recording manually:

Start data recording:

 

Press ≈ ç concurrently

Start of data recording

 

REC is displayed in the center

 

bar

End data recording:

 

Press ≈ ç concurrently

Stop data recording

 

REC is not illuminated

What happens when I take a break?

If you take a break during DATA RECORDING, and the computer goes into SLEEP MODE after 5 minutes (chapter 16) then DATA RECORDING will be interrupted automatically. If SLEEP MODE is ended by pressing a button then DATA RECORDING will be automatically continued.

TIP: Leave your VDO computer on the handlebar holder so that sleep mode is activated and recording is interrupted automatically after 5 minutes (see chapter 16 Sleep mode).

ATTENTION: If you manually interrupt data recording, for a break for example by pressing ≈ ç , then a new data record will be generated at restart. Even if you do a trip data reset during „DATA RECORDING“ your VDO computer will generate a new data record.

39

Page 47 Page 49
Image 48
Page 47 Page 49
Contents VDO Series Z My Settings Picturebook P02 P03 P04/05 P06 P07 P08 P09 WS in mm / inch P11 Congratulations Cable ties Optional extension set VDO cadence transmitterP01 P01 page 1 in the picture book Personal settings with manual max. pulse entry Initial operation, AC-button Language selectionSelecting the operation mode Bike mode or walk mode Lap timer StopwatchGetting Started Permanent functions in the displayGuarantee Conditions Technical Specifications General Control System OperationFunctions To go to setting mode Press button ç for 3 secondsDisplay Middle BARExtension Options & Accessories DesignationHandlebar holder Speed transmitter and magnet P07Putting on the PULSE-CHEST Belt P08 Place the pulse transmitter just below your chest and guideRange of the pulse-chest belt transmitter = 0.90 m Initial OPERATION, AC-BUTTON P09-2Language Selection Age appearsPulse Pairing Speed PairingCadence Pairing Initial Operation Pulse TransmitterSetting the Language Setting Time & DateSetting the ALARM, Alarm Clock Alarm SETWheelsize SET … SET Size ?CONTINUE??SET OK? SET DoneSetting Total Kilometers Bike Check / Service IntervalOdometer SET ‚ ODO Bike 1/2 Next DIGIT?SET Weight ?CONTINUE? Person Data SETSET AGE ?CONTINUE? SET SEX ?CONTINUE?Pulse Limit Settings Pulse Limit ?SET?‚ Auto Limit 1 HIGH…LOW Manual Entry of Pulse Limit ValuesSET Recovery Pulse Measurement Recovery SETMeasuring the Recovery PULSE/RECOVERY Time Select Training ProgramPower Calc SET ‚ Power Calc SET DoneBike Type Select „SITTING POS SelectSetting the Actual Altitude Annual Uphill Altitude Gain Bike 1 and Bike 2 and Walk ModeHome Alti SET Home Alti ?SET OK?Trip Data ?RESET? Trip Data Reset DoneReset Total Ride Time ‚ Total Time Reset DONE?Resetting the Total Distance Meter ‚ Odototal Reset DoneResetting the Navigator ‚ Navigator Reset DoneTrip Data Reset Done L Permanent FunctionsHeader Center BAR„TRIP Data ?RESET? Trip MAX„AVG Climb MAX Climb‚ Trip Data Reset Done MAX DownTrip Distance Ride TimeMAX Speed Option only with Cadence ExtensionCadence CAD AVGODO Bike OdototalTime Bike StopwatchLAP REC AVG PulseMAX Pulse Pulse MAX %Selecting Navigator Mode CalorieNavigator SET BackwardNavigator ?RESET? Navigator Reset Done‚ „NAVIGATOR Next Digit ‚ Navigator ?SET OK?Timer Settings Timer ?SELECT?LAP Timer ?SELECT? Timer ?SET?‚ Timer 1+2 SET Done LAP-TIMERCountdown ?SET? ‚ SET Minutes ?CONTINUE?Training with Timer 1 / Timer 2 / Timer 1+2 Training with the Stopwatch13.2 Beginning of the recording Start the recording 4sec Combination timer 1+2 Training with the Countdown TimerBeginning of the recording Start the recording 4sec Training with the LAP Timer Lap time Average pulse during the lapTraining Prerequisite Lap number and time of the lapManual delete of training data is not possible BarTransferring Data to Your PC P11 PC Link SelectSelection of the Recording Interval Check the battery For Wake UPDescription special case On the transmitterChest belt Belt Check the battery Speed signalReceiving cadence signals No speed displayPersonal maximum pulse Timer has not been started Is in the set training ranges Start timerInstalled Service yourselfGuarantee Conditions Cycle Parts GmbH, Große Ahlmühle 33, D-76865 RohrbachTechnical Specifications .-641/W.. Page Смесва с други отпадъци на работното място FIN  !$!! 7f6524j6.-64%0+.-6410+%0 Page SLO EU-Konformitätserklärung EU-Declaration of Conformity USA CDN USA CDN VDO Series Z

Z3 PC-LINK specifications

The VDO Cyclecomputing Z3 PC-LINK is a cutting-edge bicycle computer that combines high-performance functionality with user-friendly features, making it an essential tool for both casual cyclists and serious athletes. One of its standout features is the robust wireless connectivity that allows seamless data transfer to a personal computer for detailed analysis. This capability enables cyclists to track their performance over time, monitor progress, and adjust their training accordingly.

Equipped with a large, easy-to-read display, the Z3 PC-LINK provides real-time data, including current speed, average speed, distance traveled, and ride time. Additionally, it tracks features such as maximum speed, total distance, and elapsed time. Its intuitive interface makes it incredibly user-friendly, allowing cyclists to quickly navigate through various data points while on the move.

The Z3 PC-LINK is designed for versatility, catering to various cycling disciplines, from road biking to mountain biking. It can function as a basic speedometer for casual riders or a sophisticated tool for seasoned athletes. The device supports multiple bike profiles, enabling users to easily switch between bikes without having to reconfigure settings.

One of the key technologies integrated into the Z3 PC-LINK is the GPS functionality, which provides accurate tracking of routes taken. This feature allows users to map their rides, making it easier to explore new trails and roads while keeping track of performance metrics.

Additionally, the Z3 PC-LINK is built with durability in mind, featuring a weather-resistant casing that withstands the rigors of outdoor cycling. Its long battery life ensures that it can keep up with extended rides and adventures, making it a reliable companion for any cycling journey.

Another noteworthy characteristic is the compatibility with various sensors and devices, including heart rate monitors and cadence sensors. By integrating these additional data sources, cyclists can gain deeper insights into their performance, facilitating a more comprehensive understanding of their physical condition and cycling efficiency.

In conclusion, the VDO Cyclecomputing Z3 PC-LINK stands out in the crowded market of bicycle computers. With its advanced features, user-friendly design, and reliable performance, it empowers cyclists to take control of their training and routes effectively. Whether for leisure or competitive cycling, the Z3 PC-LINK is an invaluable asset for enhancing the cycling experience.
Top Page Image Contents