INSTRUCTION MANUAL
the elastic strap over your back to the other end of the pulse transmitter
step 3 Connect the second end of the plastic strap to the pulse transmitter
step 4 Use the size adjustment of the elastic strap to adjust the chest belt to your chest size
Please note:
-Do not adjust the chest belt too loose; if it is too loose it can slip if there are jolts (e.g. when walking)
-When putting on the chest belt moisten the electrodes so that trouble- free function is also ensured when starting exercise, before contact is established through sweat.
-Range of the pulse-chest belt transmitter = 0.90 m
2.4.MOUNTING THE COMPUTER ON THE WRIST BAND >>> P09 step 1 Insert the computer into the opened wrist band
step 2 Insert the lock into the wrist band holder from below step 3 Turn the lock with a coin to tighten it
ATTENTION: Never use a screwdriver to operate the lock. This could damage the lock (if the lock should be damaged then you can get the lock as original replacement part)
3. INITIAL OPERATION
3.1. INITIAL OPERATION, AC-BUTTON >>> P09-2
After inserting the batteries we recommend that you first reset the de- vice to factory settings to ensure that no residual data from the quality
control process remains in the computer. This puts the computer into an assured start mode.
-Press the AC button for approximately 2 seconds with a sharp object, such as a pencil
3.2. LANGUAGE SELECTION
3sec. | ç | Setting mode LANGUAGE SELECT |
step 2 | ‚ | Confirm LANGUAGE SELECT with M |
step 3 | ∂ ƒ | Press the up or down button until the desired langu- |
|
| age appears |
step 4 | ‚ | Confirm your language selection with M |
3.3. MANUAL PAIRING - INITIAL OPERATION WIRELESS SYSTEM
For initial operation of the digital wireless system manual pairing must ALWAYS be executed. Manual pairing ensures that the computer learns the coding of the transmitter you are using.
step 1 Insert the computer into the
step 2 Ensure that there are no ANT+Sport digital transmitters other than the transmitter you are using within a
Your computer will randomly select one of 128,000 codes. This ensures that signals of other transmitters are not received or processed (e.g. when riding in a group). If dashes are shown in the display, in spite
of pairing, you must repeat the manual pairing process. In doing so ensure that the electrodes of the pulse transmitter belt are wet, or that the distance between the magnets and the speed/cadence transmitter is not greater than 5 mm.
ATTENTION: Your computer can save the codes of up to 5 transmitters
13