EN
Problem when pairing the pulse- | - Check the battery in the chest |
chest belt | belt |
| - Check the battery in the |
| computer (if battery voltage is |
| insufficient then the receiver |
| cannot receive the signals) |
|
|
No speed display | - Check the magnet position |
| (distance between magnet |
| and transmitter, position of the |
| magnet to the transmitter point |
| on the transmitter) |
| - Check the battery in the |
| transmitter |
| - Check the battery in the |
| computer (if battery voltage is |
| insufficient then the receiver |
| cannot receive the signals) |
|
|
No cadence display | - Check the magnet position |
| (distance between magnet |
| and transmitter, position of the |
| magnet to the transmitter point |
| on the transmitter) |
| - Check the battery in the |
| transmitter |
| - Check the battery in the |
| computer (if battery voltage is |
| insufficient then the receiver |
| cannot receive the signals) |
|
|
No speed display (dash in the | The receive channel for speed is |
display) | switched off (a |
| has elapsed without receiving a |
| speed signal) |
| Press buttons ¥ + ç at the |
| same time |
|
|
No cadence data (dash in the | The receive channel for cadence |
display) | is switched off (a |
| period has elapsed without |
| receiving cadence signals) |
| Press buttons ¥ + ç at the |
| same time |
|
|
42