Reebok Fitness RBCCEL79022 manual Assembly, Mallet

ASSEMBLY

Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tools, assembly requires an adjustable wrench		and a rubber
mallet	.

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 29. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Split Washer		Small M8	M10 Split		Torque Washer	Large M8	Pedal Arm
(72)–2	Washer (71)–2		Washer (103)–4		(101)–2	Washer (70)–2	Spacer (65)–4
M10 Nylon		M4 x 16mm		M4 x 19mm		M4 x 25mm	M6 x 20mm
Locknut (85)–4		Self-tapping		Screw (92)–2		Screw (96)–2	Screw (75)–4
		Screw (82)—6
M6 x 16mm Button		M8 x 19mm Button			M8 x 25mm Patch		M8 x 19mm Shoulder
Screw (93)–2		Screw (81)–4			Screw (73)–10		Screw (102)–2
				Bolt Set (67)–2

1.Identify the Front Stabilizer (63), which has Wheels (27) attached to one side. Attach the Front Stabilizer to the front of the Frame (1) with four M8 x 25mm Patch Screws (73).

1	73
	73
	73
	63
27	1

5