HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER
HOW TO ADJUST THE STRIDE OF THE ELLIPTICAL EXERCISER
To mount the elliptical exerciser, hold the upper body arms and step onto the pedal that is in the lowest posi- tion. Next, step onto the other pedal. Push the pedals until they begin to move with a continuous motion.
Note: The crank arms can turn in either direction. It is recommended that you turn the crank arms in the direction shown by the arrow below; however, for variety you can turn the crank arms in the opposite direction.
To dismount the elliptical exerciser, wait until the ped- als come to a complete stop. Note: The elliptical exerciser does not have a free wheel; the pedals will continue to move until the flywheel stops. When the pedals are stationary, step off the higher pedal first. Then, step off the lower pedal.
Upper Body Arms |
Pedals |
Crank Arm |
To adjust the stride of the elliptical exerciser, first pull one of the adjustment knobs until the adjustment bracket pivots freely. Pivot the adjustment bracket until the adjustment knob is aligned with one of the three holes in the crank arm, and gently release the knob. Then, pivot the adjustment bracket back and forth slightly to make sure that the adjustment pin is engaged in one of the three holes in the crank arm.
| Adjustment |
Adjustment | Bracket |
Pin |
|
Crank |
|
Arm |
|
| Adjustment |
| Knob |
| Holes |
Adjust the other side of the elliptical exerciser in the same way.
13