Life Fitness Pro Series owner manual Once a DAY, Once a Week, Once a Month, Lubrication

Page 60

4. Maintenance Procedures

ONCE A DAY

•Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.

•Visually inspect all cables for wear at and around connections and along entire length of cable. Always replace at first sign of wear.

ONCE A WEEK

•Visually inspect all hardware for loosening, tampering or wear.

•Check jam nut on weight stack for tightness.

•Inspect all accessory and or carabiner clips or connecting links for wear.

•Check condition of hand grips.

•Check cables for stretch and adjust as necessary by loosening the large nut on top of the weight stack and screw in the threaded plug until cable is tight and the weight pin goes in all holes easily. Tighten the large nut to complete the adjustment.

ONCE A MONTH

•Clean Guide Rods with paint thinner on a cloth and wipe off old residue. Clean tops of bearings at stack and inspect for heavy buildup on rods below headplate (lift half of stack and do a visual inspection, then clean as necessary).

LUBRICATION

•Clean and lubricate all stainless steel slides as necessary.

•Lubricate linear bearings with TF1000 grease (part number SK50-P0004-0000).

•Lubricate guide rods with Break-Free (part number SK50-P0005-0000). Apply the Break-Free to a cotton cloth, then run the cotton cloth up and down the guide rods as needed.

•Range limiting device should be cleaned and lightly oiled using Break-Free.

NOTES

•Use polishing compound (such as car wax) to clean and remove shoe scuffs from powdercoated surfaces as necessary.

4-2

Image 60

Contents M051-00416-A000 March Safety and Warranty Information Proper UsageCheck for Damaged Parts Specific Operating Warnings Warranty What is CoveredChanges in Warranty not Authorized General Specifications Top Weight Bushings Weight Stack Guide RodsWeight Stack Suspension Weight Selection ShaftCounter Balanced Input Arms Radial BearingsLinear Bearings ShaftsSeat Adjustments WarrantyHand grips Foot PlatformsPRO Series Machines Upper Body Exercise Machines Chest Press SU05 Starting Position Ending PositionIncline Chest Press SU10 Pectoral FLY SU15 Shoulder Press SU25 Deltoid Lateral Raise SU31 Rear DELTOID/PECTORAL FLY SU35- PEC FLY Exercise Starting PositionRear DELTOID/PECTORAL FLY SU35- Rear Deltoid Exercise LAT PULLDOWN- SU45 VariationsLOW ROW SU50 Starting and Ending PositionsSeated ROW SU55 Pullover SU60 Seated DIP SU66 ARM Extension SU70 Starting and Ending Position Muscle exercised TricepARM Curl SU75 Starting Position Ending Position Muscle exercised BicepDIP & Chin Assist SU86 Dip Assist Chin AssistLower Body Exercise Machines Horizontal LEG Press SL05 Seated LEG Press SL10 LEG Extension SL20 Start Position End Position Muscle exercised QuadricepsLEG Curl SL30 Start Position End Position Muscle exercised HamstringsSeated LEG Curl SL40 MULTI-HIP SL50 ExercisesHIP Adductor SL55 Start Position Muscle exercised Hip adductorsHIP Abductor SL60 Start Position Muscle exercised Hip abductorsStanding Calf SL65 Start Position End PositionGlute SL75 Start Position End Position Muscle exercised GluteusTorso Exercise Machines Abdominal ST05 Start Position End Position Muscle exercised AbdominalsLOW Back Extension ST25 Multi USE Exercise Machines Smith Machine PL06- Upper body exercises Upper body chest and arm exercisesBack exercises Performing the exercisesSmith Machine PL06- Leg exercises Leg exercisesUpper body exercises Lower body exercises Dual Adjustable Pulley SM22 Multi Adjustable Bench FB31 Chest Press SU05 Specifications Incline Chest Press SU10 SpecificationsPectoral Fly SU15 Specifications Shoulder Press SU25 Specifications Lateral Raise SU31 SpecificationsRear Deltoid/Pectoral Fly SU35 Specifications Lat Pulldown SU45 Specifications Seated Row SU55 SpecificationsPullover SU60 Specifications Seated Dip SU66 Specifications Arm Extension SU70 SpecificationsArm Curl SU75 Specifications Dip & Chin Assist SU86 Specifications Horizontal Leg Press SL05 SpecificationsSeated Leg Press SL10 Specifications Leg Extension SL20 Specifications Leg Curl SL30 SpecificationsSeated Leg Curl SL40 Specifications Multi-Hip SL50 SpecificationsHip Adductor SL55 Specifications Hip Abductor SL60 Specifications Standing Calf SL65 SpecificationsGlute SL75 Specifications Abdominal ST05 Specifications Low Back Extension ST20 SpecificationsCable Crossover SM20 Specifications Dual Adjustable Pulley SM22 Specifications Multi Adjustable Bench FB31 SpecificationsMaintenance Procedures Once a DAY Once a WeekOnce a Month Lubrication