A S S E M B LY STEP 9 |
|
CONSOLE | CONSOLE WIRES |
| |
| SCREWS |
NOTE: There is NO hardware bag for this step. All hardware is
A)Attach the CONSOLE MAST wires to the CONSOLE wires .
B)Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.
C)Attach CONSOLE to the CONSOLE MAST using the 4
DO NOT PINCH WIRES!
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect ADAPTOR to a power outlet. Locate the ON / OFF switch on the back of the CONSOLE. Flip the switch to the ON position. After a “beep”, the CONSOLE will turn on.
YOU’RE FINISHED!
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
15
LIMITED WARRANTY