3M 747 manual Introduction, Inspection

Page 3

Introduction

Thank you for purchasing this 3M™ Shoes and Wrist Strap Tester 747. To get the maximum performance from the unit, please read this user’s guide first, and refer to it as needed.

Inspection

The AC adapter provided with the Shoes and Wrist Strap Tester 747 varies according to region. In North America, the Shoes and Wrist Strap Tester 747 is provided with the SA10-0910N AC adapter, while in Europe it is provided with the SA 10-0910G AC adapter. Before using the Shoes and Wrist Strap Tester 747, make sure that you have the correct AC adapter for your region.

When the unit is delivered, check and make sure that it has not been damaged, or fails to operate according to the specifications, contact your dealer or 3M representative.

Package Contents

AC Adapter

1

ESD Shoe Testing Cord

1

Wall-Mounting Board

1

3M™ Data Logging Software 747DLS

1

ESD Shoe Testing Plate

1

Mounting Screw for ESD Shoe Testing Plate (with washer)

1

Alkaline Battery

6

Null Modem Cable 1.8 m

1

Quick Guide Test Card

1

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 3M Shoes and Wrist Strap Tester Table of Contents Inspection IntroductionIntended Use Explanation of Safety Label Signal Words & SymbolsPage Product Outline OverviewLCD Indicators Back Side Side PanelsConnecting the ESD Shoe Testing Plate Preparation Before TestingShoes Power Preparation Installing and Replacing the Batteries AC Adapter Connection Turning Power On and OffTurning Power Off Power Saver FunctionWall Mounting TestingESD Shoe Testing with the 3M Shoes and Wrist Strap Tester ALL setting is described in .1, Open Collector OutputImportant Note Use single-conductor wrist straps only Open Collector Output External Output FunctionTest Result Output Settings Test Result Output TerminalInternal Circuit Open-Collector Output Shoe and Wrist Strap ALL SettingRS-232C Communications SpecificationsPC Connection Cable ConnectionsPC System Requirements Measurement Resistance Range 0 to 200.0 MΩ Measurement SectionBattery Replacement Indicator Maintenance & ServiceLCD can display the following error messages Error MessagesCleaning Testing ConsiderationsOperational Verification Test Testing Wrist Strap Ranges Equipment RequiredTest Set-Up Testing Wrist Low Limit Refer to Wrist Test Table Testing Wrist High Limits Refer to Wrist Test TableWrist Test Table Testing Shoes Low Limits Refer to Shoes Test Table Testing Shoe RangesCULus Statement Regulatory InformationShoe Test Table Weee StatementFCC Electronic Solutions Division Static Control Products
Related manuals
Manual 40 pages 58.99 Kb
Top Page Image Contents