JVC FS-V30 Using External Equipment, Listening to External Equipment, Press the MD/AUX button

English

Using External Equipment

AHB PRO

BASS

REMOTE CONTROL RM-RXFSV5

DIMMER SLEEP POWER

DISPLAY FM MODE MD/AUX

AUTO

AHB PRO PRESET CD

PROGRAM RANDOM REPEAT

BASS TREBLE CANCEL

UP

SET

DOWN

TAPE TUNER CD BAND

MD/AUX

TREBLE	STANDBY/ON
	POWER
	MD/
	AUX

MD/AUXREC

REV

MODE

TAPE	FM/AM	CD
PHONES
DOWN	MULTI CONTROL	UP

AHB		AHB PRO
PRO
	VOLUME
TIMER		VOLUME +, –
CLOCK
	CD
	OPEN/CLOSE

VOLUME +, – VOLUME

Listening to External

Equipment

You can listen to external equipment such as an MD recorder, turntable or other auxiliary equipment.

■First make sure that the external equipment is properly connected to the System. (See page 4.)

1Set the VOLUME control to the minimum position.

2Press the MD/AUX button.

“AUX” appears on the display.

3Start playing the external equipment.

4Adjust the VOLUME control to the desired listening level.

5Apply sound effects, if you wish.

■Press the AHB PRO button to reinforce the bass sound.

■Press the BASS/TREBLE button on the Remote Control to control the tone. (See “Controlling the Tone (Bass/Treble)” on page 7.)

To exit from MD/AUX mode, select another source.

Note: For operation of the external equipment, refer to its Instructions.

Recording the System’s Source to External Equipment

You can record the System’s sources to external equipment which is connected to the LINE OUT or OPTICAL DIGITAL OUT terminals of the System, such as cassette deck or MD recorder, etc.

■First make sure that the external equipment is properly connected to the System. (See page 4.)

Play the System’s CD Player or Cassette Deck, or tune into a station.

■The recording level is not affected by the VOLUME level. It is not affected by any sound effect, either.

Note: For operation of the external equipment, refer to its Instructions.

16