Troubleshooting
•If you are having a problem with your System, check this list for a possible solution before calling for service.
•If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.
English
Symptom
No sound is heard.
Poor radio reception
The CD does not play.
The CD skips.
The CD cover does not open or close.
The cassette holder cannot be opened.
Unable to record.
Operations are disabled.
Unable to operate the Remote Control.
Possible Cause
•Connections are incorrect, or loose.
•Headphones are connected.
•Antennas are disconnected.
•The AM Loop Antenna is too close to the System.
•The FM Wire Antenna is not properly extended and positioned.
The CD is upside down.
The CD is dirty or scratched.
The AC power cord is not plugged in.
During tape playing, the power cord was unplugged.
Cassette record protect tabs are removed.
The
•The path between the Remote Control and the sensor on the Unit is blocked.
•The batteries have lost their charge.
Action
•Check all connections and make corrections. (See pages 2 – 5.)
•Disconnect the headphones.
•Reconnect the antenna securely.
•Change the position and direction of the AM Loop Antenna.
•Extend FM Wire Antenna to the best reception position.
Put the CD in with the label side up.
Clean or replace the CD.
Plug the AC power cord.
Plug in the power cord, press the POWER button, and then press the TAPE 0button.
Cover the holes on the back edge of the cassette with adhesive tape.
Unplug the System then plug it back in.
•Remove the obstruction.
•Replace the batteries.
21