Moving, DaiJy | Schwinn 10, 20 manual

IO/20	EXERCSE	BKE	MAINTENANCE
		[]	Moving	your 10/20	bike
		Carefully lift the horizoetal rear floor support to move and steer
		the 20 bike to another location (Fig. A). Pull the handlebars
		towards you, leaning the bike down, to move and steer the 10
		bike to another location (Fig. B). Be gentle while moving the unit
		as any sharp impact directly or indirectly to the computer can
		affect computer operation.
		[]	DaiJy	maintenance
		Use a damp cloth to wipe your bike and computer free of sweat.
	_	IMPORTAN_ To avoid damaging			the finish on your bike and

computer, never use a petroleum-based solvent when cleaning. Avoid getting excessive moisture on the computer.

!RepJacing the batteries

If the console does not power up, replace the batteries in the back of the console with fresh Gcel[ batteries. Insert the

batteries as indicated in the battery bay.

NOTE: If you prefer, you may power the bike with a Class 2

Transformer AC Adapter. The adapter plugs into the DC Connector

Jack on the back of the console.

The adapter must be purchased separately and can be obtained from many electronic stores.

The AC adapter specifications are:

AC ADAPTER

[_;_ I OUTPUT: 6VDC 500mA

,,INPU]! AC 120v 60Hz 5.7W

,,OUTPLFRDC 6V 500mA

Outer Diameter 5.5 ± 0.1

Internal Diameter 2.1 ± 0.1

Length 10 ± 0.1

DC Wire Length 71 in. (180cm) Wire Diameter 24AWG

The DC Connector Jack configuration:

,,Outside: Negative

,,Inside: Positive

Moving