Tasco 119234 instruction manual Camera Operation Test the Coverage Area

Camera OPERATION (continued)

3. Test the Coverage Area

One of the Trail Camera’s most useful features is the ability to test the coverage area.

•After mounting the camera, open the front housing and slide the Power switch to the “ON” position. Press the SETUP button if necessary to enter the Setup Menu.

•The PIR indicator light below the lens will blink when you have entered the coverage area.

•Adjust the camera position as needed and repeat the test until the desired coverage area is achieved.

•Press the SETUP button again when you are finished using the test mode-the camera will be “sleeping” and waiting for the PIR sensor to trigger the first photo or video capture.

•Maximum PIR sensor range is approx. 25 ft.

4. Secure the Camera

A standard padlock may be used in the camera’s lock hole to secure it and prevent theft.

14