Troubleshooting & Maintenance Procedures
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important maintenance step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY HORIZON FITNESS ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your elliptical trainer and its operating environment will keep maintenance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the following pre- ventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
Turn off the elliptical trainer with the on/off switch, and unplug the power cord from the wall outlet.
WARNING!
To remove power from the elliptical, the power cord must be disconnected from the wall outlet. (4.1E)
•Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they can cause damage to the elliptical.
•Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
•Make sure the power cord is not underneath the elliptical trainer or in any other area where it can become pinched or cut.
EVERY WEEK
Clean underneath the elliptical, following these steps:
•Turn off the elliptical trainer with the on/off switch. (4.1E)
•Then unplug the power cord at the wall outlet. (4.1E)
•Move the elliptical trainer to a remote location.
•Wipe or vacuum any dust particles or other objects that may have accumulated underneath the elliptical trainer.
•Return the elliptical trainer to its previous position.
EVERY MONTH
•Inspect all assembly bolts and pedals on the machine for proper tightness.
•Clean any debris off of the pedal arm wheels and guide rails.
28