JVC RX-9000VBK manual Basic Operating Procedure for Sub-Room, Green, Sub-room

MASTER VOLUME

SUB ROOM

CONTROL

Basic Operating Procedure for Sub-Room

The sources and functions available for the sub-room operations are limited.

For more details on the sub-room operations, see “Sub-room Operations” on pages 20 to 22.

On the front panel:

1. Press POWER.

The STANDBY lamp on the front panel goes off, and the MAIN ROOM ON/OFF lamp on the front panel lights red.

• For more details, “Turning the Power On and Off (Standby) and Selecting the Sub-room Operations” on page 20.

STANDBY

POWER

The sound comes out of the speakers in the main room, and the buttons and controls on the front panel work for the main room operations.

2. Press SUB ROOM ON/OFF so that the SUB ROOM ON/OFF lamp on the button lights green.

SUB ROOM

ON/OFF

The sound comes out of the front speakers in the sub-room.

If no sounds come out of the front speakers, press SUB ROOM (SPEAKERS 2) so that the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel lights green.

•See also “Setting the Front Speakers Either for the Main Room or Sub-room” on page 23, and “Activating the Sub- room Front Speakers” on page 22.

Note:

If the center speaker or rear speakers are used for the DSP mode (see page 32) for the main room operations, the SUB ROOM (SPEAKERS 2) button does not work.

3.Press SUB ROOM CONTROL so that the SUB ROOM CONTROL lamp on the button lights

green.

Now the buttons and controls on the front panel work for the sub-room operations.

4. Select and play a source.

SOURCE SELECTOR

5.Turn MASTER VOLUME to adjust the volume level of the sound from the front speakers in the

sub-room.

–

+

From the remote control:

1.Set the multi-room operation selector to “SUB ROOM.”

MAIN SUB

ROOM ROOM

Now the buttons and controls on the remote control work for the sub-room operations.

2. Press AUDIO POWER ON.

The STANDBY lamp on the front panel goes off, and the SUB ROOM ON/OFF lamp on the front panel lights green.

•See also “Turning the Power On and Off (Standby) and Selecting the Sub-room Operations” on page 20.

STANDBY ON

The sound comes out of the front speakers in the sub-room.

If no sounds come out of the front speakers, press SUB ROOM (SPEAKERS 2) on the front panel so that the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel lights green.

•See also “Activating the Sub-room Front Speakers” on page 22.

Note:

If the center speaker or rear speakers are used for the DSP mode (see page 32) for the main room operations, the SUB ROOM (SPEAKERS 2) button does not work.

3. Select and play a source.

DVD	DVD MUILTI	CD	TAPE/MD
TV/DBS	VIDEO	PHONO	FM/AM
VCR 1	CDR/VCR 2

•See also “Operating the Playback Source for the Sub-room” on page 22.

4.Press VOLUME + / – to adjust the volume level of the sound from the front speakers in the sub- room.

VOLUME

14