JVC RX-9000VBK manual Getting Started, Before Installation, Checking the Supplied Accessories

Page 6

Getting Started

This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply.

Before Installation

General

•Be sure your hands are dry.

•Turn the power off to all components.

•Read the manuals supplied with the components you are going to connect.

Locations

•Install the receiver in a location that is level and protected from moisture.

•The temperature around the receiver must be between –5˚C and 35˚C (23˚F and 95˚F).

•Make sure there is good ventilation around the receiver. Poor ventilation could cause overheating and damage the receiver.

Handling the receiver

•Do not insert any metal object into the receiver.

•Do not disassemble the receiver or remove screws, covers, or cabinet.

•Do not expose the receiver to rain or moisture.

Checking the Supplied Accessories

Check to be sure you have all of the following items, which are supplied with the receiver.

The number in the parentheses indicates quantity of the pieces supplied.

•Remote Control (1)

•Batteries (2)

•AM Loop Antenna (1)

•FM Antenna (1)

•RF Rod Antenna (1)

•IR Signal Transmitter (1)

Connecting the FM and AM Antennas

FM Antenna Connections

A

 

ANTENNA

75

 

 

B

 

ANTENNA

75

 

 

 

 

FMAXIAL

 

 

 

FMAXIAL

 

 

 

 

CO

 

 

 

 

CO

 

 

A

M

 

A

M

A

M

 

A

M

OP

 

EX

T

OP

 

EX

T

LO

 

 

LO

 

 

 

 

 

 

 

 

 

 

 

 

FM Antenna

ANTENNA Extend the supplied FM antenna horizontally.

FM 75

COAXIAL

AM

Outdoor FM Antenna Cable

LOOP

AM

EXT

A. Using the Supplied FM Antenna

The FM antenna provided can be connected to the FM 75Ω COAXIAL terminal as a temporary measure.

B. Using the Standard Type Connector with Outdoor FM Antenna (Not Supplied)

A standard type connector should be connected to the FM 75Ω COAXIAL terminal.

Note:

If reception is poor, connect the outdoor antenna.

Before attaching a 75Ω coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

If anything is missing, contact your dealer immediately.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents RX-9000VBK For the main unit Table of Contents Features PrecautionsIntroduction Remote Control Front Panel Parts IdentificationConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers Analog connectionsCassette deck or MD recorder CD recorderVideo component connections Video camera TV and/or DBS tunerDVD player DBS tuner DVD player Digital connectionsDigital input terminals Digital output terminalTo set up the IR signal transmitter Find the place where you attach the IR signal transmitterTo set up the RF rod antenna Insert the RF rod antenna to the RF Remote Antenna terminalPlug the power cord into an AC outlet Putting Batteries in the Remote ControlConnecting the Power Cord Replace the coverConnection  Connection ı Multi-room OperationsRequired Speaker Connections for the Sub-room MeritsPress Audio Power on Basic Operating Procedure for Main RoomPress Power Select and play a sourceSub-room Basic Operating Procedure for Sub-RoomGreen Set the multi-room operation selector to SUB RoomTurning the Power On and Off Standby Canceling the Main Room OperationsMain Room Basic Operations When analog input is selected Always lights up Signal and speaker indicators on the displayWhen digital input is selected Lights up when the left Selecting the Main Room Source to PlayEtc Adjusting the Main Room VolumeActivating the Main Room Front Speakers Selecting different sources for picture and soundMuting the Main Room Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassChanging the Display Brightness Adjusting the Front Speaker Output BalanceUsing the Sleep Timer Recording a SourcePress SUB Room ON/OFF Sub-Room OperationsPress SUB Room Control For the sub-room operationsTo use this receiver for the sub-room operations again Canceling the Sub-room OperationsSelecting the Sub-room Source to Play Selected source name for sub-room appearsActivating the Sub-room Front Speakers Adjusting the Sub-room Volume Muting the Sub-room SoundOperating the Playback Source for Sub-room Press Muting to mute the sound throughSetting the Subwoofer Information Basic SettingsSetting the Front Speakers Either for Main Room or Sub-room Changing the Source NameSetting the Speakers for the DSP Modes Press Setting repeatedly untilRear Delay appears on Display Output Delay time of the rear speakerTurn Multi JOG to select Frequency appears on the displaySelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingSettings OPT. DIG. in appears on DisplayShowing the Text Information on Display Press ONE Touch OPERATION. Onetouchoperation Storing the Basic Settings Adjustments One Touch OperationAdjust the sound using the functions listed above MemoReceiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Press TUNER/SEA MemoryAssigning Names to Preset Stations Selecting the FM Reception ModeUsing the SEA Modes Selecting Your Favorite SEA ModeCreating Your Own SEA Mode Using the DSP Modes What are the DSP Modes?Surround modes DAP modes DVD Multi Playback ModeReproducing the Sound Field 3D-PHONIC modesSpeaker arrangements Available DSP modes By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement To activate the SurroundAdjusting the Surround Modes Theater appears on Display Adjust the speaker output levels Adjust the rear toneAdjust the center tone Large Theater or DIG LAdjust the overall level of the effects Adjust the room size senseAdjust the liveness Press Surround ModeDAP mode Live Club Adjusting the DAP ModesPress DSP Mode repeatedly until HALL, or Concert Arena Appears on the displayRepeatedly until the DAP mode Concert HALL, or Concert Arena appears on the displayMode you want appears on Display Activating the DSP ModesSelect and play a sound source Press DVD Multi so that DVD Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Multi appears on the displayPress Menu Using the On-Screen MenusWhen you finish, press Exit Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # Press %/ Þto moveFor Dolby Pro Logic Adjusting the DVD Multi Playback ModePress %/ Þto move To Surround LEVEL, then press @/ # For Dolby Digital and DTS Digital SurroundPress %/ Þto move To SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Press %/ Þto move to SEA, then press @ / #Preset station number Press %/ Þto move To Preset Name Then press SETPress %/ Þto move To Preset MEMORY, then press @/ # Press %/ Þto move to Tuner CONTROL, then press @/ #CD player CD recorder Cassette deck MD recorder Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionSame time Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemCD player MD recorder Disc Search Only for CD PlayerShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceDisc Information screen To exit from the Disc information screenPress %/ Þto move To Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to Title Input Then press SET Press %/ Þto move to the genre you want, then press SETPress Text Display while MD is selected as the source For the MD recorderIf the AV Compu Link terminal on the TV is RECEIVER/AMP AV Compu Link Remote Control SystemTarget video components If the AV Compu Link terminal on the TV is AV Compu Link EXCASE1 If the components are equipped with the S-video Terminals Video terminalsOne-Touch Video Play Automatic Power On/Off Standby Automatic Power OnOne-Touch DVD Play Sound control section Amplifier Operating JVC’s Audio/Video ComponentsTuner CD playerTurntable CD player-changerCD recorder Cassette deckMulti only for the main room VCR 1 VCR connected to VCR 1 jacksDVD player Operations, these buttons can beIf there are more than one code listed for your brand of TV Release TV/CATV/DBS PowerSet the remote control mode to CATV/DBS Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing VCR 1 Power Release VCR 1 PowerIf there are more than one code listed for your brand Echostar Expressvu General Instrument Hitachi 28, 29, 6011, 44 Panasonic PrimestarTroubleshooting Problem Possible Cause SolutionConnect an Ntsc TV FM tuner IHF SpecificationsAmplifier AM tuner781 954 650 Valley Road Wayne, NJ1099 Limited Warranty AUDIO-2 0200HIMMDWJEIN

RX-9000VBK specifications

The JVC RX-9000VBK is a powerful and versatile A/V receiver designed to cater to the needs of audiophiles and home theater enthusiasts alike. With a sleek, modern design, this receiver combines advanced technology with user-friendly features to deliver an exceptional audio and visual experience.

One of the standout features of the RX-9000VBK is its impressive power output. With a total of 100 watts per channel, this receiver can drive even large speakers with ease, ensuring that you enjoy your favorite movies, music, and games with robust sound. The built-in 7.1 channel surround sound capability creates an immersive audio experience, making you feel like you are part of the action.

The RX-9000VBK is equipped with JVC's proprietary HD Codec, which enhances the audio quality by providing high-definition sound processing. This technology ensures that audio tracks are reproduced accurately, capturing the nuances of every detail. The receiver also supports a variety of audio formats, including Dolby Digital and DTS, allowing you to enjoy your media in the best possible quality.

In addition to its impressive audio capabilities, the JVC RX-9000VBK offers a range of connectivity options. It features multiple HDMI inputs, enabling you to connect various devices such as Blu-ray players, gaming consoles, and streaming devices. The integrated HDMI ARC (Audio Return Channel) allows for easy connection to your TV, simplifying the overall setup.

The user interface of the RX-9000VBK is designed with convenience in mind. It includes an intuitive on-screen display that makes navigation simple, whether you’re adjusting audio settings or selecting input sources. The receiver also comes with a remote control, providing you with the flexibility to operate your home theater system from anywhere in the room.

Additionally, the JVC RX-9000VBK includes a built-in FM tuner, allowing you to enjoy your favorite radio stations with crystal-clear sound quality. The receiver is also compatible with external audio sources, including USB drives and musical instruments, making it a great choice for musicians and music lovers.

Overall, the JVC RX-9000VBK stands out for its robust power, advanced audio technologies, and thoughtful design. It is an excellent choice for anyone looking to enhance their home audio experience, providing both performance and versatility in a single package. Whether you are hosting movie nights, gaming sessions, or simply enjoying your favorite playlists, the RX-9000VBK is sure to deliver exceptional sound quality and performance.
Top Page Image Contents