JVC RX-9000VBK manual Sub-Room Operations, Press SUB Room Control, Press SUB Room ON/OFF

SUB ROOM

ON/OFF

Sub-Room Operations

This section explains only the operations used when you play any sound source in the sub-room.

See pages 15 for the main room operations.

IMPORTANT:

When using the buttons and controls on the front panel:

Check the following lamps’ illumination.

For the sub-room operations:

•The SUB ROOM ON/OFF lamp is lit.

•The SUB ROOM CONTROL lamp is lit.

When using the remote control:

Check to see if the multi-room operation selector and the remote control mode selector are set to the correct positions:

3. Press SUB ROOM CONTROL.	SUB ROOM
	CONTROL

The SUB ROOM CONTROL lamp on the button lights green.

The name of the current source (or station frequency) for the sub-room appears on the display.

Current source name for sub-room appears

Multi-room operation selector:

To operate this receiver for the sub-room, set it

to “SUB ROOM.”

Remote control mode selector:

To operate this receiver, set it to “AUDIO/TV/

VCR.”

MAIN SUB

ROOM ROOM

AUDIO/

TV/VCR

CATV/DBS

Current volume level for sub-room is shown here

Now the buttons and controls on the front panel work for the sub-room operations.

•Each time you press the button, the lamp on the button turns on and off.

Turning the Power On and Off (Standby)

and Selecting the Sub-room Operations

On the front panel: STANDBY

1. Press POWER.

POWER

To turn off the power (into standby mode), STANDBY

press POWER again.

The STANDBY lamp lights red. A small amount POWER of power is consumed in standby mode. To turn

the power off completely, unplug the AC power cord.

The STANDBY lamp on the front panel goes off, and the MAIN ROOM ON/OFF lamp on the front panel lights red. The name of the current main room source (or station frequency) appears on the display.

Current source name for main room appears

MAIN ROOM

ON/OFF

From the remote control ONLY:

1. Set the multi-room operation selector to “SUB ROOM.”

Now the buttons on the remote control work for the sub-room operations.

MAIN SUB

ROOM ROOM

Current volume level for main room is shown here

The currently selected SPEAKERS 1 (MAIN ROOM) and/or SPEAKERS 2 (SUB ROOM) lamps on the front panel also light red.

2. Press SUB ROOM ON/OFF.	SUB ROOM
	ON/OFF

The SUB ROOM ON/OFF lamp on the button lights green (and the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel also lights green if it has been activated).

•If the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel is not lit, see also “Setting the Front Speakers Either for the Main Room or Sub-room” on page 23, and “Activating the Sub-room Front Speakers” on page 22.

2. Press AUDIO POWER ON.

The STANDBY lamp on the front panel

STANDBY ON

goes off, and the SUB ROOM ON/OFF lamp on the front panel lights green (and the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel also lights green if it has been activated).

•If the SUB ROOM speaker (SPEAKERS 2) lamp on the front panel is not lit, see “Activating the Sub-room Front Speakers” on page 22.

To turn off the power (into standby mode),
press AUDIO POWER STANDBY.
The STANDBY lamp lights red, and the SUB STANDBY	ON
ROOM ON/OFF lamp on the front panel goes
off.

Note:

If you have turned off the receiver with the volume level set at more than level “30,” the volume level will be automatically set at level “30” next time you turn on the receiver.

20