JVC RX-9000VBK manual Repeatedly until the DAP mode

4. Adjust the overall level of the effects.

1)	Press BALANCE/SURROUND	BALANCE/SURROUND
			ADJUST
	ADJUST repeatedly until “EFFECT
	LEVEL” appears on the display.
	The display changes to show the current
	setting.
2)	Turn MULTI JOG to select the effect		MULTI JOG

level.

•As you turn it, the effect level changes as follows:

EFFECT 1 EFFECT 2 EFFECT 3

EFFECT 5 EFFECT 4

As the number increases, the overall level of reflections applied to the direct sounds increases. (Normally set it to “EFFECT 3.”)

From the remote control:

When using the remote control, you cannot adjust the effect level, room size, and liveness. To adjust these parameters, use the buttons and controls on the front panel.

1. Press SURROUND MODE	SURROUND
repeatedly until the DAP mode —	MODE
LIVE CLUB, DANCE CLUB,
CONCERT HALL, or CONCERT
ARENA — appears on the display.

The DSP indicator also lights up on the display.

•When you have set “REAR SPK” to “NONE,” the 3D- PHONIC indicator also lights up.

SOUND

2. Press SOUND.

5. Adjust the room size (sense of

spaciousness).

1) Press BALANCE/SURROUND

ADJUST repeatedly until “ROOM

BALANCE/SURROUND

ADJUST

The 10 keys are activated for sound adjustments.

3. Adjust the speaker output levels.		REAR•L
	5	6

SIZE” appears on the display.

The display changes to show the current

setting.

2) Turn MULTI JOG to select the room

size.

• As you turn it, the room size changes

as follows:

MULTI JOG

• To adjust the left rear speaker level, press

REAR•L –/+ (from –10 dB to +10 dB).

• To adjust the right rear speaker level, press

REAR•R –/+ (from –10 dB to +10 dB).

ENTER

REAR•R

8 9

ROOM SIZE 1ROOM SIZE 2ROOM SIZE 3

ROOM SIZE 5 ROOM SIZE 4

4. Press REAR TONE to select the

rear tone level you want.

REAR TONE

4

As the number increases, the interval between reflections increases so that you will feel as if you were in a larger room. (Normally set it to “ROOM SIZE 3.”)

•Each time you press the button, the display changes to show the following:

RAER SHARP1 RAER SHARP2 RAER FLAT

(Canceled)

6.Adjust the liveness.

1)Press BALANCE/SURROUND ADJUST repeatedly until “LIVENESS” appears on the display. The display changes to show the current setting.

2)Turn MULTI JOG to select the liveness effect.

•As you turn it, the liveness level changes as follows:

BALANCE/SURROUND

ADJUST

MULTI JOG

RAER SOFT 1 RAER SOFT 2

To make the rear sounds clearer, select “REAR SHARP1” (a

little) or “REAR SHARP2” (much).

To make the rear sounds softer, select “REAR SOFT 1” (a

little) or “REAR SOFT 2” (much).

When “REAR FLAT” is selected, no adjustment is applied.

5.Adjust the effect level, room size, and liveness by using the buttons and controls on the front panel.

LIVENESS 1 LIVENESS 2 LIVENESS 3

LIVENESS 5 LIVENESS 4

As the number increases, the attenuation level of reflections over time decreases so that acoustics change from “Dead” to “Live.” (Normally set it to “LIVENESS 3.”)

39