ProForm PFTL57908.0 manual Screws before firmly tightening any of them

Page 11

12.Set the console assembly on the Left and Right Uprights (77, 92). Be careful not to pinch any wires.

Attach the console assembly to the Pulse Bar (90) with six #8 x 3/4" Screws (1). Start all six

Screws before firmly tightening any of them.

13.Identify the Right Handrail Cover (55), which is marked with a sticker. Slide the Right Handrail Cover onto the right Handrail (80).

Remove the paper backing off of the tape in the indicated location and press the Right Handrail Cover (55) against the console assembly.

Tighten a #8 x 1/2" Screw (2) into the Rightbe Handrail Cover and the Right Upright (92); careful not to overtighten the Screw. Attach the Left Handrail Cover (78) in the same way.

12

 

Console Assembly

 

 

921

90

1

1

77

 

 

 

 

 

13

Console

 

 

 

 

 

Assembly

 

 

 

 

 

Tape

 

 

 

 

80

78

 

 

 

 

 

2

 

 

 

 

 

77

 

Tape

 

 

 

 

80

55

292

 

 

 

 

 

14. Carefully lower the Uprights (77, 92) as shown.

14

Console Assembly

Start First

Start the two indicated #8 x 1 1/2" Screws (3)

into the Left and Right Uprights (77, 92) and the

 

 

3

 

console assembly. If necessary, pull back on the

 

 

 

77

console assembly slightly to align the holes in

 

 

 

the Uprights with those on the console assem-

Start

 

 

 

bly. Start the other two #8 x 1 1/2" Screws (3)

 

 

 

and then tighten all four Screws; do not

First

3

 

 

overtighten the Screws. Then, raise the

 

 

 

Uprights (77, 92).

 

92

 

 

See steps 4 and 6. Firmly tighten the four 3/8" x

 

 

 

4" Bolts (8).

 

 

 

 

 

11

 

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents On the WEB QUESTIONS?Model No. PFTL57908.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Pulse sensor is not a medical device Important PrecautionsPage Before YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet Tighten the Bolts yet Careful not to pinch the Wire Harness With a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star Washer Bolts yet Not Connected PROPERLY, the CON Sole MAY be Damaged When Overtighten the Screws. Then, raise Screws before firmly tightening any of themRaise the Frame 48 to the position shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeTurn on the fan if desired Measure your heart rate if desired. Before usingProgram HOW to USE a Personal Trainer QuickSelect a custom quick program HOW to Create Your OWN Quick ProgramFollow your progress with the matrix and the displays HOW to USE Your OWN Quick ProgramSelect a custom quick programs Information Mode HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillCompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL57908.0101 Red Wire, M/F 102 #8 x 1/2 Console Ground Screw Exploded Drawing A-Model No. PFTL57908.0 R0908A Exploded Drawing B-Model No. PFTL57908.0 R0908A Exploded Drawing C-Model No. PFTL57908.0 R0908A Exploded Drawing D-Model No. PFTL57908.0 R0908A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents