ProForm PFTL57908.0 manual Top, Problem The walking belt slows when walked on

Page 23

Remove the three #8 x 3/4" Screws (1) and care-

 

fully pivot the Motor Hood (58) off.

1

 

58

Locate the Reed Switch (65) and the Magnet (40)

 

 

on the left side of the Pulley (41). Turn the Pulley

 

 

until the Magnet is aligned with the Reed Switch.

1/8 in.

 

Make sure that the gap between the Magnet and

 

the Reed Switch is about 1/8 in. (3 mm). If nec-

15

 

essary, loosen the #8 x 3/4" Pan Head Screw (15),

40

move the Reed Switch slightly, and then retighten

65

the Pan Head Screw. Reattach the Motor Hood

Top

41

(not shown) with the #8 x 3/4" Screws (not shown)

 

and the #8 x 2" Screws (not shown) if necessary.

View

 

Run the treadmill for a few minutes to check for a

 

 

correct speed reading.

 

 

PROBLEM: The incline of the treadmill does not change correctly

 

 

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 13.

b. If the walking belt is overtightened, treadmill perfor-

b

 

mance may decrease and the walking belt may be-

2–3 in.

come damaged. Remove the key and UNPLUG

 

THE POWER CORD. Using the hex key, turn both

 

 

idler roller bolts counterclockwise, 1/4 of a turn.

 

 

When the walking belt is properly tightened, you

 

 

should be able to lift each edge of the walking belt

 

 

2 to 3 in. (5 to 7 cm) off the walking platform. Be

 

 

careful to keep the walking belt centered. Then,

 

 

plug in the power cord, insert the key, and run the

Idler Roller Bolts

treadmill for a few minutes. Repeat until the walking

belt is properly tightened.

 

 

c. If the walking belt still slows when walked on, see the front cover of this manual.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents On the WEB QUESTIONS?Model No. PFTL57908.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Pulse sensor is not a medical device Important PrecautionsPage Before YOU Begin Assembly Tighten the Nut the Wheel must turn freely Make sure that the power cord is unpluggedDo not fully fold the Frame yet Tighten the Bolts yet Careful not to pinch the Wire HarnessWith a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star Washer Bolts yet Not Connected PROPERLY, the CON Sole MAY be Damaged When Overtighten the Screws. Then, raise Screws before firmly tightening any of themRaise the Frame 48 to the position shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeTurn on the fan if desired Measure your heart rate if desired. Before usingProgram HOW to USE a Personal Trainer QuickSelect a custom quick program HOW to Create Your OWN Quick ProgramFollow your progress with the matrix and the displays HOW to USE Your OWN Quick ProgramSelect a custom quick programs Information Mode HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillCompatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Top Problem The walking belt slows when walked onProblem Solution Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL57908.0101 Red Wire, M/F 102 #8 x 1/2 Console Ground Screw Exploded Drawing A-Model No. PFTL57908.0 R0908A Exploded Drawing B-Model No. PFTL57908.0 R0908A Exploded Drawing C-Model No. PFTL57908.0 R0908A Exploded Drawing D-Model No. PFTL57908.0 R0908A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

PFTL57908.0 specifications

The ProForm PFTL57908.0 is a versatile and feature-rich treadmill designed to meet the diverse needs of home fitness enthusiasts. Its robust construction and intelligent design make it a standout option for anyone looking to elevate their workout regimen.

One of the standout features of the ProForm PFTL57908.0 is its powerful motor. Equipped with a 2.75 CHP motor, this treadmill provides a solid performance that supports speeds up to 12 miles per hour. Whether you’re walking, jogging, or running, this motor ensures a smooth and consistent experience, enabling users to tailor their workouts based on fitness goals.

The spacious running surface is another crucial aspect of the PFTL57908.0. The treadmill has a generous 20-inch by 55-inch deck, offering ample space for comfortable movement. Additionally, it features ProForm's innovative FlexSelect cushioning system, which allows users to choose between a firmer surface for enhanced stability and a softer surface that reduces impact on joints, thereby promoting safer workouts.

Furthermore, the treadmill comes equipped with a variety of pre-programmed workout options. With over 30 built-in workout apps, users can easily select routines tailored to specific fitness targets, whether it be weight loss, endurance training, or muscle toning. The intuitive interface displays relevant stats such as speed, distance, time, and calories burned, providing a comprehensive overview of each session.

Connectivity is another strong suit of the ProForm PFTL57908.0. It is compatible with iFit technology, enabling users to access an extensive library of interactive workouts led by personal trainers from around the world. This integration allows for an engaging workout experience, often simulating outdoor runs and trails.

Safety features are also prioritized with a durable safety key that stops the treadmill in case of unexpected situations. Moreover, the built-in sound system allows for an enjoyable workout atmosphere, with the ability to connect personal devices via Bluetooth.

In summary, the ProForm PFTL57908.0 stands out as a robust and feature-packed treadmill suitable for a wide range of fitness levels. With its powerful motor, large running surface, flexible cushioning, comprehensive workout programs, and smart connectivity, it provides an exceptional platform for achieving personal fitness goals from the comfort of home.
Top Page Image Contents