ProForm PFTL57908.0 manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 13

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or service- man if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Your treadmill, like any other type of sophisticated electronic equipment, can be seriously damaged by sudden voltage changes in your homeʼs power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appliances being turned on or off. To decrease the possibility of your treadmill being damaged, always use a surge suppressor with your treadmill (see drawing 1 at the right). To purchase a surge suppressor, see your local PROFORM dealer or call the telephone number on the front cover of this manual and order part number 146148, or see your local electronics store.

Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. There must be a moni- toring light on the surge suppressor to indicate whether it is functioning properly. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control system is damaged, the walking belt may slow, accelerate, or stop unexpectedly, which may result in a fall and serious injury.

This product must be grounded. If it should malfunc- tion or break down, grounding provides a path of least resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into a surge suppressor, and plug the surge suppressor into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be used to connect the surge suppressor to a 2-pole receptacle as shown in drawing 2 if a properly grounded outlet is not available.

1

Grounded Outlet Box

 

 

Surge Suppressor

 

 

Grounding Pin

 

Grounding Pin

2

Grounded Outlet

Grounding Plug

Grounded Outlet Box

 

Adapter

Surge Suppressor

Lug

Metal Screw

The temporary adapter should be used only until a properly grounded outlet (drawing 1) can be installed by a qualified electrician.

The green-colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole receptacle outlet box covers are not grounded. Contact a qualified elec- trician to determine if the outlet box cover is grounded before using an adapter.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model No. PFTL57908.0 Serial No QUESTIONS?Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT On the WEBTable of Contents Pulse sensor is not a medical device Important PrecautionsPage Before YOU Begin Assembly Do not fully fold the Frame yet Make sure that the power cord is unpluggedTighten the Nut the Wheel must turn freely With a second Bolt Spacer 95, 3/8 x 4 Bolt 3/8 Star Washer Careful not to pinch the Wire HarnessTighten the Bolts yet Bolts yet Not Connected PROPERLY, the CON Sole MAY be Damaged When Overtighten the Screws. Then, raise Screws before firmly tightening any of themRaise the Frame 48 to the position shown HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Insert the key into the consoleTurn on the fan if desired Measure your heart rate if desired. Before usingProgram HOW to USE a Personal Trainer QuickSelect a custom quick program HOW to Create Your OWN Quick ProgramSelect a custom quick programs HOW to USE Your OWN Quick ProgramFollow your progress with the matrix and the displays Information Mode HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Top Problem The walking belt slows when walked onProblem Solution Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part LIST-Model No. PFTL57908.0101 Red Wire, M/F 102 #8 x 1/2 Console Ground Screw Exploded Drawing A-Model No. PFTL57908.0 R0908A Exploded Drawing B-Model No. PFTL57908.0 R0908A Exploded Drawing C-Model No. PFTL57908.0 R0908A Exploded Drawing D-Model No. PFTL57908.0 R0908A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

PFTL57908.0 specifications

The ProForm PFTL57908.0 is a versatile and feature-rich treadmill designed to meet the diverse needs of home fitness enthusiasts. Its robust construction and intelligent design make it a standout option for anyone looking to elevate their workout regimen.

One of the standout features of the ProForm PFTL57908.0 is its powerful motor. Equipped with a 2.75 CHP motor, this treadmill provides a solid performance that supports speeds up to 12 miles per hour. Whether you’re walking, jogging, or running, this motor ensures a smooth and consistent experience, enabling users to tailor their workouts based on fitness goals.

The spacious running surface is another crucial aspect of the PFTL57908.0. The treadmill has a generous 20-inch by 55-inch deck, offering ample space for comfortable movement. Additionally, it features ProForm's innovative FlexSelect cushioning system, which allows users to choose between a firmer surface for enhanced stability and a softer surface that reduces impact on joints, thereby promoting safer workouts.

Furthermore, the treadmill comes equipped with a variety of pre-programmed workout options. With over 30 built-in workout apps, users can easily select routines tailored to specific fitness targets, whether it be weight loss, endurance training, or muscle toning. The intuitive interface displays relevant stats such as speed, distance, time, and calories burned, providing a comprehensive overview of each session.

Connectivity is another strong suit of the ProForm PFTL57908.0. It is compatible with iFit technology, enabling users to access an extensive library of interactive workouts led by personal trainers from around the world. This integration allows for an engaging workout experience, often simulating outdoor runs and trails.

Safety features are also prioritized with a durable safety key that stops the treadmill in case of unexpected situations. Moreover, the built-in sound system allows for an enjoyable workout atmosphere, with the ability to connect personal devices via Bluetooth.

In summary, the ProForm PFTL57908.0 stands out as a robust and feature-packed treadmill suitable for a wide range of fitness levels. With its powerful motor, large running surface, flexible cushioning, comprehensive workout programs, and smart connectivity, it provides an exceptional platform for achieving personal fitness goals from the comfort of home.
Top Page Image Contents