ProForm PFTL14511.1 user manual

Page 10

7.Attach the Left Handrail (88) to the Left Upright (89) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4).

Do not tighten the Screws and Bolt yet.

Attach the Right Handrail (87) in the same way.

8.Set the console assembly face down on a soft surface to avoid scratching the console assembly.

Remove all the Screws (A) attaching the Crossbar (93). Next, lift off the Crossbar. Discard the Screws.

9.IMPORTANT: To avoid damaging the Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (112).

Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (112), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten them.

7		4 11
		4 11	87
11	5	5
11	5
4		88
4
89

8		Console
		Console
		Assembly
	A
	93
9	9	112
	9	112
	93	35
	93	87
9	112	87
9	112
35
	88

Image 10

Contents Call TOLL-FREE QUESTIONS?Model No. PFTL14511.1 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedTighten the Screws yet. Note It may be help See the inset drawing. Tie the wire tieBe careful not to pinch the Upright Wire Attach the Right Upright not shownBase Covers into place yet Page Again. if YOU do not Connect the CON Wire. See the inset drawing. The connectorsShould slide together easily and snap into Then tighten themPage When the frame stops moving, remove Power cord. Next, see page 17 and turn onPower Important See page 15 and plugPage HOW to Connect the Power Cord Operation and AdjustmentUse a Surge Suppressor Features of the Console DiagramConsole HOW to USE the Touch Screen HOW to Turn on the PowerSole. Important Calibrate the incline system HOW to SET UP the ConsoleConnect to your wireless network Check for firmware updates Create an iFit Live accountHOW to USE the Manual Mode Key from the console When you are finished exercising, removePower cord. Important If you do not do Measure your heart rate if desiredSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode Calibrate the incline system of the treadmill HOW to USE the Maintenance ModeExit the maintenance mode Find keycodesSet up and manage a wireless network connection HOW to USE the Wireless Network ModeEnable Wi-Fi Exit the wireless network modeHOW to USE the Stereo Sound System HOW to USE the Internet BrowserHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Top ViewPage Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Qty DescriptionDescription Qty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT