18.Attach the Rear Feet (57) to the Frame (56) as shown with four #8 x 3/4" Screws (2).
Lower the Frame (56) (see HOW TO LOWER THE TREADMILL FOR USE on page 28).
19.Press the Grommet (77) into the square hole in the Base (94).
18 |
57 |
57 |
2 |
2 |
56 |
19 |
94 |
77 |
20.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31).
14