HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s speakers, you must connect your MP3 player, CD player, or other personal audio player to the console.
Plug one end of your audio wire into the audio jack on the side of the console. Then, plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that your audio wire is fully plugged in.
HOW TO USE THE INTERNET BROWSER
Note: To use the browser, you must have access to a wireless network including an 802.11b/n router with SSID broadcast enabled (hidden networks are not supported).
To open the browser, touch the globe button near the lower left corner of the screen. Then, select a website.
To return to the previous web page, press the back button on the console or touch the Browser Back but-
Next, press the play but- ton on your MP3 player, CD player, or other personal audio player. Then, adjust the volume level on your personal audio player or press the vol- ume increase and decrease buttons on the console.
Increase
Decrease
ton on the screen. To exit the browser, press the home button on the console or touch the Return button on the screen.
To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 17.
To enter a different web address in the URL bar, first, slide your finger down the screen to view the URL bar, if necessary. Then, touch the URL bar, use the key-
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.
Note: The USB port on the side of the console is for firmware updates only.
board to enter the address, and touch the Go button.
Note: While you are using the browser, the speed, incline, fan, and volume buttons will still function, but the workout buttons will not function.
Note: If you have questions after following these instructions, go to www.iFit.com/support for assistance.
27