ProForm PFTL14511.1 user manual Base Covers into place yet

Page 9

5. Identify the Left Base Cover (82) and the Right

5

 

 

Base Cover (83). Slide the Left Base Cover onto

 

 

the Left Upright (89). Slide the Right Base Cover

 

 

 

onto the Right Upright (90). Do not press the

 

 

80

Base Covers into place yet.

 

 

 

 

 

Identify the Left Upright Cover (79) and the

 

 

 

Right Upright Cover (80). Slide the Left Upright

 

89

90

Cover onto the Left Upright (89). Slide the Right

 

 

 

Upright Cover onto the Right Upright (90).

 

79

 

 

 

83

 

 

 

 

82

 

 

6. Cut the plastic tie in the Left Handrail (88) and

6

 

 

the Right Handrail (not shown). If necessary,

 

 

 

 

 

press the 5/16" Cage Nuts (31) back into place.

81

 

 

Identify the Left Handrail (88) and hold it near

 

 

 

 

 

the Left Upright (89). Insert the Upright Wire (81)

 

 

 

through the bracket on the bottom of the Left

31

 

88

Handrail. Pull the Upright Wire out of the end of

 

Tie

 

 

the Left Handrail.

 

 

 

 

 

 

 

 

89

 

9

 

 

Image 9
Contents Model No. PFTL14511.1 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyBe careful not to pinch the Upright Wire See the inset drawing. Tie the wire tieTighten the Screws yet. Note It may be help Attach the Right Upright not shownBase Covers into place yet Page Should slide together easily and snap into Wire. See the inset drawing. The connectorsAgain. if YOU do not Connect the CON Then tighten themPage Power Power cord. Next, see page 17 and turn onWhen the frame stops moving, remove Important See page 15 and plugPage Operation and Adjustment HOW to Connect the Power CordUse a Surge Suppressor Diagram Features of the ConsoleConsole HOW to Turn on the Power HOW to USE the Touch ScreenSole. Important Connect to your wireless network Check for firmware updates HOW to SET UP the ConsoleCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Power cord. Important If you do not do When you are finished exercising, removeKey from the console Measure your heart rate if desiredHOW to USE AN Onboard Workout Select an onboard workoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Exit the maintenance mode HOW to USE the Maintenance ModeCalibrate the incline system of the treadmill Find keycodesEnable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingTop View Symptom The walking belt slows when walked onPage Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description Part ListDescription Qty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT