ProForm PFTL14511.1 Important See page 15 and plug, Power cord. Next, see page 17 and turn on

Page 13

16. IMPORTANT: See page 15 and plug in the

power cord. Next, see page 17 and turn on

16

IMPORTANT:

the power.

See page 25; follow steps 1, 2, and 4.

When the frame stops moving, remove the

key from the console and unplug the power

cord.

Make sure to follow all instructions in this step.

17. IMPORTANT: Before you begin this step,	17
make sure that you have read and followed	17	56
all of the instructions in step 16.		56
Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.		12	6
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown;
make sure that the caps remain in the ends
of the Storage Latch.
Attach the lower end of the Storage Latch (53) to			53
Attach the lower end of the Storage Latch (53) to
the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12).	Latch		Large
Attach the upper end of the Storage Latch (53)	Knob		Large
Attach the upper end of the Storage Latch (53)			Barrel
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (12).
		94	12
			12
			3
	13

Image 13

Contents Model No. PFTL14511.1 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyBe careful not to pinch the Upright Wire See the inset drawing. Tie the wire tieTighten the Screws yet. Note It may be help Attach the Right Upright not shownBase Covers into place yet Page Should slide together easily and snap into Wire. See the inset drawing. The connectorsAgain. if YOU do not Connect the CON Then tighten themPage Power Power cord. Next, see page 17 and turn onWhen the frame stops moving, remove Important See page 15 and plugPage HOW to Connect the Power Cord Operation and AdjustmentUse a Surge Suppressor Features of the Console DiagramConsole HOW to USE the Touch Screen HOW to Turn on the PowerSole. Important Connect to your wireless network Check for firmware updates HOW to SET UP the ConsoleCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Power cord. Important If you do not do When you are finished exercising, removeKey from the console Measure your heart rate if desiredSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Exit the maintenance mode HOW to USE the Maintenance ModeCalibrate the incline system of the treadmill Find keycodesEnable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingTop View Symptom The walking belt slows when walked onPage Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description Part ListDescription Qty Exploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT