ProForm PFTL16011.0 user manual Screws and Star Washers will be Used in step

6. Remove the four 3/8" x 1" Screws (6) and	6
four 3/8" Star Washers (14) from the Handrail				6
Brackets (89). Then, remove the Handrail				14
Brackets from the Left and Right Handrails (92,					89
						6
93). The Screws and Star Washers will be
used in step 8.						14
			6
						93
			14	89
					6
				14
					92
7. Remove the four 3/8" x 1" Flat Head Screws (15)	7
and four 3/8" Star Washers (14) from the Left					Hole	15
and Right Uprights (90, 99).				89
Orient the Handrail Brackets (89) so that the						14
indicated holes are in the positions shown.
Insert the Upright Wire (88) through the left
Handrail Bracket.		Hole
Attach the Handrail Brackets (89) to the Uprights	88
			15
(90, 99) with the four 3/8" x 1" Flat Head Screws
(15) and four 3/8" Star Washers (14) that you			14
just removed. Tighten the Screws.			89			99
			90
8. Identify the Left and Right Handrails (92, 93).	8					93
Hold the Left Handrail (92) near the Left Upright
(90). Insert the Upright Wire (88) into the large				89
hole in the bottom of the Left Handrail and out of
				14
the front of the Left Handrail.
Slide the Left Handrail (92) onto the left Handrail				6
		92
Bracket (89), and attach the Left Handrail with	88
two of the 3/8" x 1" Screws (6) and 3/8" Star						14
Washers (14) that you removed in step 6. Do
						6
not tighten the Screws yet.	14
Attach the Right Handrail (93) as described						99
above. Note: There is not a wire in the Right	6	89
Upright (99).			14
			6
			90
	10