ProForm PFTL16011.0 Be careful not to pinch the wires, Attach the Right Upright not shown

Page 9

4. Hold the Left Upright (90) against the Base

4

 

 

(105). Be careful not to pinch the wires.

If

 

 

 

 

 

necessary, position the base ground wire (A)

 

 

 

in the hole in the side of the Left Upright. Insert

 

 

 

two 3/8" x 2 3/4" Screws (8) and two 3/8" x

 

 

 

 

1 1/4" Screws (9) with two 3/8" Star Washers

 

 

 

(14) into the Left Upright.

 

 

 

 

Partially tighten the 3/8" x 2 3/4" Screws (8) and

 

 

 

the 3/8" x 1 1/4" Screws (9) until the heads of the

 

90

 

Screws touch the Left Upright (90); do not fully

 

 

tighten the Screws yet. Note: It may be help-

 

 

 

ful to use the Short Hex Key (43) on the Screw

 

 

 

shown.

 

 

8

 

 

 

 

43

Attach the Right Upright (not shown) in the

 

 

same way. Note: There are no wires on the right

Hole

 

 

side.

 

 

 

 

14

 

 

 

 

 

 

 

 

 

A

 

 

 

9

14

105

 

 

 

 

5. Identify the Left and Right Base Covers (96, 97).

5

 

 

 

 

 

 

Slide the Left Base Cover (96) onto the Left

 

 

 

Upright (90). Slide the Right Base Cover (97)

 

 

 

onto the Right Upright (99). Do not press the

 

 

 

Base Covers into place yet.

 

 

 

99

 

 

 

 

 

 

 

90

97

 

 

96

 

 

 

 

9

 

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model No. PFTL16011.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblySee the inset drawing. Tie the wire tie Tighten the Screws yet. Note It may be help Be careful not to pinch the wiresAttach the Right Upright not shown Base Covers into place yetScrews and Star Washers will be Used in step Assembly Assembly. They will be used in stepStart all four Screws, and then tighten them Page Is shown. Start all four Screws, and then Tighten them Page Care and Maintenance HOW to PUT on the Heart Rate MonitorTroubleshooting Chest Heart Rate MonitorOperation and Adjustment HOW to Connect the Power CordUse a Surge Suppressor Features of the Console Console DiagramHOW to USE the Touch Screen HOW to Turn on the PowerConnect to your wireless network Check for firmware updates HOW to SET UP the ConsoleCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Measure your heart rate if desired Avoid movingContacts your handsTurn on the fan if desired HOW to USE AN Onboard Workout Select an onboard workoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Exit the maintenance mode HOW to USE the Maintenance ModeCalibrate the incline system of the treadmill Find keycodesEnable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeMake sure that the audio wire is fully inserted HOW to USE the Stereo Sound SystemCool Down Mode HOW to USE the Internet BrowserHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyQty Description Part ListDescription Qty Exploded Exploded Drawing B Exploded Drawing C Exploded Drawing D Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents