ProForm PFTL16011.0 user manual See the inset drawing. Tie the wire tie

Page 8

2. Pull the Upright Wire (88) and the base ground

2

 

 

 

wire (A) through the indicated hole in the Base

 

 

 

 

 

 

 

(105).

 

 

 

 

Attach the base ground wire (A) to the Base

 

 

 

 

(105) with a #8 x 1/2" Ground Screw (10).

 

 

 

 

Press the Grommet (101) into the square hole in

 

 

 

 

the Base (105).

 

 

 

 

 

Hole

101

 

 

 

 

 

 

 

88

 

 

 

 

10

A

105

 

 

 

 

3. Identify the Left Upright (90), which is marked

3

 

 

 

“Left.” Have a second person hold the Left

 

 

 

88

 

 

 

Upright near the Base (105).

90

 

See the inset drawing. Tie the wire tie in the

 

 

 

 

 

 

Left Upright (90) securely around the end of the

 

 

Wire

88

Upright Wire (88). Then, pull the other end of the

 

 

wire tie until the Upright Wire is routed through

 

 

Tie

 

the Left Upright.

 

 

 

 

 

 

Wire

 

 

 

Tie

 

 

 

90

 

 

 

 

 

88

105

 

 

8

 

 

 

Image 8
Contents QUESTIONS? Model No. PFTL16011.0 Serial NoCall TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedSee the inset drawing. Tie the wire tie Be careful not to pinch the wires Tighten the Screws yet. Note It may be helpAttach the Right Upright not shown Base Covers into place yetScrews and Star Washers will be Used in step Start all four Screws, and then tighten them AssemblyAssembly. They will be used in step Page Is shown. Start all four Screws, and then Tighten them Page HOW to PUT on the Heart Rate Monitor Care and MaintenanceTroubleshooting Chest Heart Rate MonitorUse a Surge Suppressor Operation and AdjustmentHOW to Connect the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Touch ScreenHOW to SET UP the Console Connect to your wireless network Check for firmware updatesCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Turn on the fan if desired Measure your heart rate if desiredAvoid movingContacts your hands Start the workout HOW to USE AN Onboard WorkoutSelect an onboard workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode HOW to USE the Maintenance Mode Exit the maintenance modeCalibrate the incline system of the treadmill Find keycodesHOW to USE the Wireless Network Mode Enable Wi-FiSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Stereo Sound System Make sure that the audio wire is fully insertedCool Down Mode HOW to USE the Internet BrowserHOW to Fold and Move the Treadmill HOW to Fold the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart List Qty DescriptionDescription Qty Exploded Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty