ProForm PFTL16011.0 user manual HOW to USE the Equipment Settings Mode

Page 25

HOW TO USE THE EQUIPMENT SETTINGS MODE

The console features an equipment settings mode that allows you to select a language and the unit of measurement, to turn on and turn off the display demo mode, and to enable or disable the key.

1.Select the settings main menu.

Insert the key into the console (see HOW TO TURN ON THE POWER on page 18). Next, select the main menu (see step 2 on page 20). Then, touch

the gears button near the lower right corner of the screen to select the settings main menu.

2.Select the equipment settings mode.

In the settings main menu, touch the Equipment Settings button.

3.Select a language.

To select a language, touch the Language button and select the desired language. Then, touch the back button on the screen to return to the equip- ment settings mode. Note: This feature may not be enabled.

4.Select the unit of measurement.

Touch the US/Metric button to view the selected unit of measurement. Change the unit of measure- ment, if desired. Then, touch the back button on the screen.

5.Turn on or turn off the display demo mode.

The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the

reset position, and insert the key into the console. However, when you remove the key, the screen will show a demo presentation.

To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen.

6.Enable or disable the key.

Note: This feature may not be enabled on your treadmill.

You can disable the key so that the treadmill does not require the use of the key if desired. Touch the Safety Key button. To disable the key, touch the Disable checkbox. CAUTION: Read the safety warning on the screen before disabling the key. To enable the key again, touch the Enable checkbox.

7.Enable or disable a passcode.

The console features a child safety passcode, designed to prevent unauthorized users from using the treadmill.

Touch the Passcode button. To enable a passcode, touch the Enable checkbox. Then, enter a 4-digit passcode of your choice. Touch Save to use this passcode. Touch Cancel to return to the equipment settings mode and not use a passcode. To disable the passcode, touch the Disable checkbox.

Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct pass- code is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985.

8.Exit the equipment settings mode.

To exit the equipment settings mode, touch the back button on the screen.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model No. PFTL16011.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblySee the inset drawing. Tie the wire tie Tighten the Screws yet. Note It may be help Be careful not to pinch the wiresAttach the Right Upright not shown Base Covers into place yetScrews and Star Washers will be Used in step Assembly. They will be used in step AssemblyStart all four Screws, and then tighten them Page Is shown. Start all four Screws, and then Tighten them Page Care and Maintenance HOW to PUT on the Heart Rate MonitorTroubleshooting Chest Heart Rate MonitorHOW to Connect the Power Cord Operation and AdjustmentUse a Surge Suppressor Features of the Console Console DiagramHOW to USE the Touch Screen HOW to Turn on the PowerConnect to your wireless network Check for firmware updates HOW to SET UP the ConsoleCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Avoid movingContacts your hands Measure your heart rate if desiredTurn on the fan if desired Select an onboard workout HOW to USE AN Onboard WorkoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Exit the maintenance mode HOW to USE the Maintenance ModeCalibrate the incline system of the treadmill Find keycodesEnable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeMake sure that the audio wire is fully inserted HOW to USE the Stereo Sound SystemCool Down Mode HOW to USE the Internet BrowserHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyQty Description Part ListDescription Qty Exploded Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT
Top Page Image Contents