ProForm PFTL16011.0 user manual Assembly, Start all four Screws, and then tighten them

Page 11

9.

Remove and discard the #10 x 3/4" Screws

9

 

 

(3) from the Right Handrail (93) and the Left

93

 

 

 

Handrail (not shown).

 

 

 

 

Pulse Wire

 

Hold the pulse assembly near the Right Handrail

 

3

 

(93). Insert the pulse wire from the pulse assem-

 

 

 

bly into the hole in the side of the Right Handrail

 

Pulse

 

and out of the end of the Right Handrail as

 

Assembly

 

shown.

 

 

 

 

 

Hole

10.

Slide the pulse assembly onto the Left and Right

10

 

 

Handrails (92, 93). Make sure that the brack-

93

 

 

ets on the pulse assembly are flush against

 

Pulse Wire

3

the rubber on the Handrails. Be careful not to

 

 

pinch the pulse wire against the pulse

 

Pulse

11

assembly.

 

 

Attach the pulse assembly with four #10 x 3/4"

92

Assembly

 

11 3

 

Screws (3) and four #10 Star Washers (11).

 

 

Start all four Screws, and then tighten them.

 

 

 

11. Set the console assembly face down on a soft

11

 

1

surface to avoid scratching the console

 

assembly.

 

1

1

Identify the Left and Right Trays (110, 111).

 

 

110

111

Attach the Trays (110, 111) to the console

4

1

4

assembly with six #8 x 1/2" Screws (1). Start all

six Screws, and then tighten them. Be careful

12

 

12

not to overtighten the Screws.

 

 

 

Remove the four 5/16" x 5/8" Screws (4) and

 

 

 

four 5/16" Star Washers (12) from the console

 

 

 

assembly. They will be used in step 13.

 

 

 

 

 

 

Console

 

 

 

Assembly

 

11

 

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL16011.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblySee the inset drawing. Tie the wire tie Base Covers into place yet Be careful not to pinch the wiresTighten the Screws yet. Note It may be help Attach the Right Upright not shownScrews and Star Washers will be Used in step Start all four Screws, and then tighten them AssemblyAssembly. They will be used in step Page Is shown. Start all four Screws, and then Tighten them Page Chest Heart Rate Monitor HOW to PUT on the Heart Rate MonitorCare and Maintenance TroubleshootingUse a Surge Suppressor Operation and AdjustmentHOW to Connect the Power Cord Features of the Console Console DiagramHOW to USE the Touch Screen HOW to Turn on the PowerCreate an iFit Live account HOW to SET UP the ConsoleConnect to your wireless network Check for firmware updates Calibrate the incline systemHOW to USE the Manual Mode Turn on the fan if desired Measure your heart rate if desiredAvoid movingContacts your hands Start the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Find keycodes HOW to USE the Maintenance ModeExit the maintenance mode Calibrate the incline system of the treadmillExit the wireless network mode HOW to USE the Wireless Network ModeEnable Wi-Fi Set up and manage a wireless network connectionHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully inserted Cool Down ModeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Move the TreadmillSymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesQty Description Part ListDescription Qty Exploded Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents