If desired, adjust the volume by pressing the Vol increase and decrease buttons on the console.
To pause the workout, touch one of the menu but- tons or press the Stop button on the console. To continue the workout, touch the Resume button or the Start button. To end the workout session, touch the End Workout button.
6.Measure your heart rate if desired.
Note: If you use the handgrip heart rate moni- tor and the chest heart rate monitor at the same time, the console will not display your heart rate accurately. For information about the chest heart rate monitor, see page 15.
Before using the handgrip heart rate monitor, remove the sheets of plastic from the metal con- tacts. In addition, make sure that your hands are clean.
To measure your heart rate, stand on the foot rails and hold the contacts with your palms for approximately ten seconds;
avoid movingContacts your hands.
When your pulse is detected, your
heart rate will be shown. For the most accurate heart rate reading, continue to hold the con- tacts for about 15 seconds.
7.Turn on the fan if desired.
The fan features multiple speed settings and an auto mode. When the auto mode is selected, the speed of the fan will automatically increase and decrease as the speed of the walking belt increases and decreases.
Press the Fan increase button to increase the fan speed. Note: If you press the Fan increase button once while the fan is on its maximum speed set- ting, the auto fan mode will be selected. Press the Fan decrease button repeatedly to decrease the fan speed or to turn off the fan.
8.When you are finished exercising, remove the key from the console.
Step onto the walking platform and touch the home button or the back button on the screen or press the Stop button on the console. A workout sum- mary will appear on the screen. After you view the workout summary, touch the Finish button to return to the main menu. You may also be able to either save or publish your results using one of the options on the screen. Then, remove the key from the console and put it in a secure place.
When you are finished using the treadmill, press the power switch into the off position and unplug the power cord. IMPORTANT: If you do not do this, the treadmill’s electrical components may wear prematurely.
21