ProForm PFTL16011.0 HOW to USE the Maintenance Mode, Find keycodes, Exit the maintenance mode

Page 26

HOW TO USE THE MAINTENANCE MODE

The console features a maintenance mode that allows you to update the console firmware, calibrate the incline of the treadmill, calibrate the screen, view tech- nical information, and view a button’s keycode.

1.Select the settings main menu. See step 1 on page 25.

2.Select the maintenance mode.

In the settings main menu, touch the Maintenance button to enter the mainte- nance mode.

The mainte-

nance mode main screen will show information about the model and version of the treadmill.

3.Update the console firmware.

For the best results, regularly check for firm- ware updates.

Touch the Firmware Update button to check for firmware updates using your wireless network. The update will begin automatically.

To avoid damaging the treadmill, do not turn off the power or remove the key while the firmware is being updated.

Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exer- cise experience.

Note: If you cannot update the console firmware over your wireless network, you can update the firmware using a USB drive. Go to www.iFit.com and download the latest firmware update onto your USB drive. Safely remove the USB drive from your

computer and plug it into the USB port on the side of the console. The update should begin automatically.

The screen will show the progress of the update. When the update is complete, the treadmill will turn off and then turn back on. If it does not, press the power switch into the off position. Wait for several seconds, and then press the power switch into the reset position. Note: It may take a few minutes for the console to be ready for use.

4.Calibrate the incline system of the treadmill.

Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. Press the Cancel but- ton to return to the maintenance mode. When the incline system is calibrated, touch the Finish button.

IMPORTANT: Keep pets, feet, and other objects away from the treadmill while the incline sys- tem is calibrating. In an emergency, pull the key from the console to stop the incline calibration.

5.View machine information.

Touch the Machine Info button to view information about your treadmill. After you view the information, touch the back button on the screen.

6.Find keycodes.

The Keycodes button is intended to be used by service technicians to identify whether a certain button is working correctly.

7.Exit the maintenance mode.

To exit the maintenance mode, press the back but- ton on the console.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Call TOLL-FREE QUESTIONS?Model No. PFTL16011.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Assembly Make sure that the power cord is unpluggedSee the inset drawing. Tie the wire tie Attach the Right Upright not shown Be careful not to pinch the wiresTighten the Screws yet. Note It may be help Base Covers into place yetScrews and Star Washers will be Used in step Start all four Screws, and then tighten them AssemblyAssembly. They will be used in step Page Is shown. Start all four Screws, and then Tighten them Page Troubleshooting HOW to PUT on the Heart Rate MonitorCare and Maintenance Chest Heart Rate MonitorUse a Surge Suppressor Operation and AdjustmentHOW to Connect the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Touch ScreenCalibrate the incline system HOW to SET UP the ConsoleConnect to your wireless network Check for firmware updates Create an iFit Live accountHOW to USE the Manual Mode Turn on the fan if desired Measure your heart rate if desiredAvoid movingContacts your hands Start the workout HOW to USE AN Onboard WorkoutSelect an onboard workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode Calibrate the incline system of the treadmill HOW to USE the Maintenance ModeExit the maintenance mode Find keycodesSet up and manage a wireless network connection HOW to USE the Wireless Network ModeEnable Wi-Fi Exit the wireless network modeCool Down Mode HOW to USE the Stereo Sound SystemMake sure that the audio wire is fully inserted HOW to USE the Internet BrowserHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill HOW to Lower the Treadmill for USETroubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart List Qty DescriptionDescription Qty Exploded Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents