ProForm PFTL16011.0 user manual Is shown. Start all four Screws, and then Tighten them

Page 13

14. Attach a Tray Bracket (91) to the side of the	14
Right Upright (99) with two #8 x 3/4" Screws (2).	14
Right Upright (99) with two #8 x 3/4" Screws (2).
Make sure to use the two holes shown. Start
both Screws, and then tighten them.
Attach the other Tray Bracket (not shown) to	87
the Left Upright (not shown) in the same way.		91
Attach the Tray (87) to the Tray Brackets (91)		91
Attach the Tray (87) to the Tray Brackets (91)
with four #8 x 3/4" Screws (2) (only one side
is shown). Start all four Screws, and then
tighten them.		2
	99
15. Tighten the four 3/8" x 2 3/4" Screws (8), and	15
then tighten the four 3/8" x 1 1/4" Screws (9)	15	97
(only one side is shown).		97
Press the Left and Right Base Covers (96, 97)
onto the Base (105) until they snap into place.
	96
	8
	9
	105
16. Raise the Frame (64) to the position shown.	16
Have a second person hold the Frame until	16
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (65) so that the large		64
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (65) to
the Base (105) with a 3/8" x 2" Bolt (5) and a 3/8"
Nut (13).
	105	13
	Latch	5
	Latch	65
	Knob	65
	Knob
	Large
	Barrel
	13

Image 13

Contents Model No. PFTL16011.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblySee the inset drawing. Tie the wire tie Tighten the Screws yet. Note It may be help Be careful not to pinch the wiresAttach the Right Upright not shown Base Covers into place yetScrews and Star Washers will be Used in step Assembly. They will be used in step AssemblyStart all four Screws, and then tighten them Page Is shown. Start all four Screws, and then Tighten them Page Care and Maintenance HOW to PUT on the Heart Rate MonitorTroubleshooting Chest Heart Rate MonitorHOW to Connect the Power Cord Operation and AdjustmentUse a Surge Suppressor Features of the Console Console DiagramHOW to USE the Touch Screen HOW to Turn on the PowerConnect to your wireless network Check for firmware updates HOW to SET UP the ConsoleCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Avoid movingContacts your hands Measure your heart rate if desiredTurn on the fan if desired Select an onboard workout HOW to USE AN Onboard WorkoutStart the workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Exit the maintenance mode HOW to USE the Maintenance ModeCalibrate the incline system of the treadmill Find keycodesEnable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeMake sure that the audio wire is fully inserted HOW to USE the Stereo Sound SystemCool Down Mode HOW to USE the Internet BrowserHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyQty Description Part ListDescription Qty Exploded Exploded Drawing B Exploded Drawing C Exploded Drawing D Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT