ProForm 480 CX user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 11

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

This product must be earthed. If it should malfunction or break

down, earthing provides a path of least resistance for electric cur- 1 rent to reduce the risk of electric shock. This product is equipped

with a power cord having an equipment-earthing conductor and an earthing plug. Important: If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill.

See drawing 2. Plug the power cord into an appropriate outlet that is

 

 

 

2

properly installed and earthed in accordance with all local codes and

 

 

 

ordinances. Important: The treadmill is not compatible with

 

 

GFCI-equipped outlets.

 

 

 

 

 

Socket on Treadmill

Power

Cord

Outlet

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

11

Image 11
Contents Model No. PATL40906.0 Serial No Please Contact OUR CUS- Tomer Service Department DirectlyQUESTIONS? Table of Contents Important Precautions Page Right Side Before YOU BeginBack Make sure that the power cord is unplugged AssemblyHandrail Bolts and then firmly tighten them No Screws Out of the Shock. Be careful to avoid losing Shock Pin HOW to Fold and Move the TreadmillSmall Screws Wire Cylinder PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerWhenkey. you are finished exercising, remove Measure your heart rate if desiredTurn on the fan if desired Select a trainer program HOW to USE a Trainer ProgramSelect a heart rate program HOW to USE a Heart Rate ProgramPut on the optional chest pulse sensor Follow your progress with the display Audio Cable HOW to Connect Your MP3 Player or CD PlayerHOW to Connect Your Portable Stereo HOW to Connect Your Computer HOW to Connect Your Home StereoPress the Play button on your MP3 player, CD Player, or VCR HOW to Connect Your VCRMeasure your heart rate if desired Return to the treadmill and stand on the foot Directly from OUR WEB SiteFollow the on-line instructions to start Program Optional Chest Pulse Sensor Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. PATL40906.0Page Model No R0906A Exploded DRAWING-Model No. PATL40906.0 Exploded DRAWING-Model No. PATL40906.0 Goodfamily, Inc Ordering Replacement PartsLimited Warranty