Handrail Bolts and then firmly tighten them

2. With the help of a second person, carefully tip	2
the treadmill onto its right. Partially fold the	2
the treadmill onto its right. Partially fold the
Frame (58) so the treadmill is more stable. Do
not fully fold the treadmill until it is com-
pletely assembled.
Insert the other Extension Leg (89) into the base				89
Insert the other Extension Leg (89) into the base
of the Uprights (84) as shown. Next, insert two	64		8
Extension Leg Bolts (64) into the bottom of the	64
Extension Leg, and firmly tighten the Extension
Leg Bolts.				58
.				58
.
3. Attach four Base Pads (82) to the base of the	3
Uprights (84) with four 1” Tek Screws (22).	3
Uprights (84) with four 1” Tek Screws (22).
With the help of a second person, carefully raise	82
With the help of a second person, carefully raise				84
the treadmill so that all four Base Pads (82) are		82		84
on the floor and the Upright (84) is in a vertical	22	82
on the floor and the Upright (84) is in a vertical	22
position.			22
			22
	84
	22
	82	82
		82
4. Have a second person hold the Handrail (20)	4
near the Uprights (84). Insert the Upright Wire	4
near the Uprights (84). Insert the Upright Wire	64
Harness (77) into the hole in the bottom of the	64
Handrail and out of the top as shown.
Next, set the Handrail (20) on the Uprights (84).	8
Next, set the Handrail (20) on the Uprights (84).		20
Do not let the Upright Wire Harness (77) fall		20
into the right Upright.			64	8
				8
Attach the Handrail (20) with four Handrail Bolts				77
(64) and four Star Washers (8); start all four
Handrail Bolts and then firmly tighten them.
		84
				84
	7

Handrail Bolts and then firmly tighten them.