ProForm 480 CX user manual HOW to Connect Your Home Stereo, HOW to Connect Your Computer

Page 19

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

A. Plug one end of a long 3.5 mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the LINE OUT jack on your stereo. Note: While the cable is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console.

A

 

CD

 

VCR

 

Amp

LINE OUT

LINE OUT

Audio Cable

 

B.Plug one end of a long 3.5 mm to RCA stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into an RCA Y-adapter (available at electronics stores). Next, remove the wire that is currently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the Y-adapter. Plug the Y-adapter into the LINE OUT jack on your stereo. Note: While the Y-adapter is plugged into the LINE OUT jack, do not plug your headphones into the headphone jack on the console.

B

CD

 

 

 

 

VCR

 

 

Amp

LINE OUT

Audio

RCA

Y-adapter

Cable

 

 

Wire removed from

 

LINE OUT jack

 

HOW TO CONNECT YOUR COMPUTER

A. Plug one end of a long 3.5 mm to 3.5 mm stereo audio cable (available at electronics stores) into the input jack on the console. Plug the other end of the cable into the LINE OUT jack on your computer. Note: While the cable is plugged into the LINE OUT jack, do not plug your headphones into the head- phone jack on the console.

A

LINE OUT

Audio Cable

19

Image 19
Contents QUESTIONS? Please Contact OUR CUS- Tomer Service Department DirectlyModel No. PATL40906.0 Serial No Table of Contents Important Precautions Page Back Before YOU BeginRight Side Make sure that the power cord is unplugged AssemblyHandrail Bolts and then firmly tighten them No Screws Out of the Shock. Be careful to avoid losing Shock Pin HOW to Fold and Move the TreadmillSmall Screws Wire Cylinder HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove Select a trainer program HOW to USE a Trainer ProgramPut on the optional chest pulse sensor HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the display HOW to Connect Your Portable Stereo HOW to Connect Your MP3 Player or CD PlayerAudio Cable HOW to Connect Your Computer HOW to Connect Your Home StereoPress the Play button on your MP3 player, CD Player, or VCR HOW to Connect Your VCRMeasure your heart rate if desired Follow the on-line instructions to start Program Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Optional Chest Pulse Sensor Information ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked onExercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Key No. Qty Description Part LIST-Model No. PATL40906.0Page Model No R0906A Exploded DRAWING-Model No. PATL40906.0 Exploded DRAWING-Model No. PATL40906.0 Limited Warranty Ordering Replacement PartsGoodfamily, Inc