JVC RX-F10S manual Selecting the main or sub channel, Using the Midnight mode

Page 22

Basic settings

Activating the EX/ES setting—EX/ES

Depending on this setting, available Surround modes for digital multi-channel software vary—EX/ES (6.1-channel) reproduction or 5.1-channel reproduction. Select an appropriate setting for your enjoyment.

•For details about relation between EX/ES setting and available Surround mode, see page 30.

•To activate the Surround mode, see page 31.

EX/ES :AUTO According to the incoming signal, an appropriate Surround mode is applied.

•For Dolby Digital EX and DTS-ES software, EX/ES (6.1-channel) reproduction is applied*.

•For other multi-channel (5.1-channel or less) encoded software, 5.1-channel reproduction is applied.

EX/ES : ON Select to apply EX/ES (6.1-channel) reproduction to both 5.1-channel and 6.1- channel encoded software.

EX/ES : OFF Select to cancel the EX/ES (6.1-channel) reproduction.

Initial setting: EX/ES :AUTO

*For some Dolby Digital EX software, Dolby Digital 5.1-channel reproduction (“DOLBY D”) may be applied even though you have selected 6.1-channel reproduction to apply.

From the remote control:

Set the mode selector to “AUDIO/TV/VCR/DBS.”

Press EX/ES repeatedly to select either one of the above.

NOTES

•When “SURRND SPK” is set to “NO” (see page 18), this function is not available.

•When “S BACK SPK” is set to “NO” (see page 18), the Virtual Surround Back (see page 30) is applied for EX/ES (6.1-channel) reproduction.

Selecting the main or sub channel

—DUAL MONO

You can select the playback sound (channel) you want while playing digital software recorded (or broadcasted) in Dual Mono mode (see page 28), which includes two monaural channels separately.

D MONO:MAIN Select to play back the main channel (Ch 1).* Signal indicator “L” lights up while playing back this channel.

D MONO: SUB Select to play back the sub-channel (Ch 2).* Signal indicator “R” lights up while playing back this channel.

D MONO: ALL Select to play back both the main and sub-

channels (Ch 1/Ch 2).*

Signal indicators “L” and “R” light up while playing back these channels.

Initial setting: D MONO:MAIN

*Dual Mono signals can be heard from the following speakers—L (left front speaker), R (right front speaker), and C (center speaker), with respect to the current Surround setting:

 

Without

 

 

 

With Surround Activated

 

 

 

 

 

 

 

 

 

 

 

 

Dual Mono

 

 

 

Center speaker setting

 

Surround

 

 

 

 

setting

 

 

 

SML/LRG

 

 

 

NO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

R

 

L

C

 

R

L

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN

Ch 1

Ch 1

 

 

 

Ch 1

 

 

 

Ch 1

 

Ch1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUB

Ch 2

Ch 2

 

 

 

Ch 2

 

 

 

Ch 2

 

Ch 2

 

 

 

 

 

 

 

ALL

Ch 1

Ch 2

 

 

 

Ch 1+Ch 2

 

 

 

Ch 1+Ch 2

Ch 1+Ch 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

The Dual Mono format is not identical with bilingual broadcasting for TV programs. So this setting does not take effect while watching such bilingual programs.

Using the Midnight mode

—MIDNIGHT M.

You can enjoy a powerful sound at night using the Midnight mode.

NIGHT :OFF Select when you want to enjoy surround with its full dynamic range. (No effect applied.)

NIGHT : 1 Select when you want to reduce the dynamic range a little.

NIGHT : 2 Select when you want to apply the compression effect fully (useful at night).

Initial setting: NIGHT :OFF

From the remote control:

Set the mode selector to “AUDIO/TV/VCR/DBS.”

Press SOUND, then press MIDNIGHT repeatedly to select either one of the above.

NOTE

After pressing SOUND, the numeric buttons work for sound adjustments. To use the numeric buttons to operate your target source, press the corresponding source selecting button before operation; otherwise, the remote control may not work as you intend.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents RX-F10S For Customer UseFor Canada/pour le Canada For Canada/pour Le CanadaFor U.S.A Table of Contents Remote control Parts identificationDisplay window Front panelRear panel Checking the supplied accessories Before InstallationPutting batteries in the remote control Getting startedAM antenna connection Connecting the FM and AM antennasFM antenna connection Connecting the speakers Connecting the speakersSpeaker Layout Diagram Connecting the powered subwooferNot supplied Connecting video componentsTurn off all components before making connections Only for DVD recorder To S-video inputGreen Blue Red About DVD MultiWhite Connecting a DBS tuner Connecting a TVDigital input terminals Connecting the power cordDigital connection Digital output terminalSelecting the analog or digital input mode Turn on the powerTo turn off the power into standby Basic operationsSelecting the digital decode mode Adjust the volumeListening with headphones Press TV Direct Adjusting the subwoofer audio positionActivating TV Direct AUDIO/TV/VCR/DBSSignal and speaker indicators on the display Turning off the power with the Sleep TimerBasic adjustment of auto memory Turning off the sounds temporarilyFrom the remote control only Basic settingsTake your position where you listen to Sound Basic setting items Setting the speakers Operating procedureSetting subwoofer information-SUBWOOFER Setting subwoofer output-SUBWFR OUT Setting bass soundSetting the speaker distance Setting the crossover frequency-CROSS OverUsing the Midnight mode Selecting the main or sub channelVCR S/C Auto SR onAuto Sroff VCR CompntPress Adjust Sound adjustmentsBasic adjustment items Turn Multi JOG to adjust the selected itemAdjusting the effect level for DSP modes-EFFECT Adjusting speaker output levelAdjusting the center tone-CENTER Tone Selecting the subwoofer sound phase-SBWFR Adjusting the bass soundsAttenuating the input signal-INPUT ATT Reinforcing the bass-BASS BoostTo store the preset stations Tuning in to stations manuallyUsing preset tuning Tuner operationsFrom the remote control Press FM/AM to select the band Selecting the FM reception modeTo tune in a preset station Press Tuner PresetIntroducing the Surround modes Creating realistic sound fieldsReproducing theater ambience Dolby DigitalAbout other digital signals 3D Headphone modeDTS Introducing the DSP modes All Channel Stereo mode ALL CH STDigital Acoustic Processor DAP modes Using the Surround/DSP modes Virtual Surround BackSelect and play any source other than DVD Multi Turn Multi JOG to select the Surround/DSP mode you wantTo cancel Surround/DSP modes Press SurroundConnections 2 Video cable connection AV Compu Link remote control systemConnections 1 AV Compu Link connection CaseAutomatic power on/off Connecting procedureAutomatic selection of TV’s input mode One-touch video playChannel + Operating other JVC productsVCR REC PauseTOP MENU/MENU DVD recorder or DVD playerDVR/DVD ZoomRelease TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Try to operate your TV by pressing TVTry to operate your VCR by pressing VCR Changing the transmittable signals for operating a VCRRelease VCR Manufacturers’ codes for VCRManufacturers’ codes for DBS tuner Release DBSManufacturers’ codes for Catv converter Release DVR/DVDTroubleshooting Problem Possible Cause SolutionFM tuner IHF SpecificationsAmplifier AM tunerLimited Warranty Authorized Service Centers RX-F10S Home Theater Receiver Recepteur Pour Cinema Maison Mises en garde, précautions et indications diverses English Parts identification Front panel Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components Green Blue Red White Red DBS tuner Composite video cable not supplied You can connect any digital componens which have an optical Basic operations Adjust the volume Adjusting the subwoofer audio PositionTurning off the sounds temporarily Basic settings Basic setting items 12 cm Setting the crossover frequency-CROSS Over Dual Mono Setting Auto Surround-AUTO Surrnd Sound adjustments Adjusting the effect level for DSP modes-EFFECT Adjusting the sound parameters forSurround/DSP modes Adjusting the bass sounds From the remote control only Press the numeric buttons 1 10, +10 to Plii Movie Pro Logic II Movie Plii Movie and Pro Logic II Music PliiPlii Music English Introducing the DSP modes EX/ES setting SML/LRG AUTO/ONActivating the Surround/DSP modes AV Compu Link remote control system Connecting procedure Operating other JVC products DVD/CARD CancelReturn DimmerManufacturers’ Operating otherProducts English Release DBS Troubleshooting Power Requirements AC 120 V , 60 Hz Power Consumption EN, FR Victor Company of JAPAN, Limited 0404MWMMDWJEIN

RX-F10S specifications

The JVC RX-F10S is an impressive home theater receiver that embodies a blend of power, versatility, and advanced technology. Designed to enhance the audio-visual experience, this receiver offers a suite of features that cater to both casual listeners and audiophiles alike.

At the heart of the RX-F10S is its robust amplification system, delivering a powerful output that ensures high-quality sound reproduction across a wide range of frequencies. With multiple channels for surround sound support, it allows users to create an immersive audio environment, perfect for movie-watching or music enjoyment. The receiver supports various surround sound formats, such as Dolby Digital and DTS, enabling a cinematic experience right in the comfort of one's living room.

One of the standout features of the RX-F10S is its connectivity options. It is equipped with multiple HDMI inputs that support the latest 4K Ultra HD and HDR pass-through. This ensures compatibility with the latest gaming consoles, Blu-ray players, and streaming devices, providing future-proofing for your entertainment setup. In addition to HDMI, the receiver also includes optical and coaxial digital inputs, along with several analog inputs, providing flexibility in connecting various audio sources.

The RX-F10S is designed with user convenience in mind. Its intuitive on-screen interface simplifies the setup process and allows users to easily navigate through settings and options. The inclusion of a remote control further enhances usability, making it easy to switch between audio sources and adjust sound settings without getting up.

Another notable aspect of the JVC RX-F10S is its compatibility with wireless technologies. It features built-in Bluetooth that allows for seamless streaming from smartphones, tablets, and other compatible devices. This adds an extra layer of convenience, enabling users to enjoy their favorite music without the hassle of physical connections.

In terms of sound customization, the RX-F10S includes an equalizer that allows listeners to adjust their audio preferences according to their taste or the acoustics of their room. This level of personalization is crucial for those who seek a tailored listening experience.

Overall, the JVC RX-F10S is a versatile home theater receiver that combines powerful performance with a wide array of connectivity options and advanced features. Its ability to deliver high-quality sound while being user-friendly makes it an excellent choice for anyone looking to upgrade their home entertainment setup. Whether you are watching movies, playing games, or listening to music, the RX-F10S is poised to elevate your audio experience to new heights.
Top Page Image Contents