JVC RX-F10S manual Connecting procedure, One-touch video play, One-touch DVD play

Page 35

Connecting procedure

1If you have already plugged your VCR, DVD player, TV, and this receiver into the AC outlets, unplug their AC power cords first.

2Connect your VCR, DVD player, TV, and this receiver as follows, using the cables with the monaural mini-plugs (not supplied).

See “Connections 1” on the previous page.

3Connect the audio input/output jacks on the VCR, DVD player, TV, and this receiver using the audio cables.

See pages 7 to 10.

4Connect the video input/output jacks on the VCR, DVD player, TV, and this receiver using the S-video cables, composite video cables, or component video cables.

See “Connections 2” on the previous page.

5Plug the AC power cords of the connected components and this receiver into the AC outlets.

6When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.

7Turn on other connected components first, then turn on this receiver.

When turning on the VCR, use the remote control supplied with this receiver (press VCR ).

The AV COMPU LINK remote control system allows you to use the five basic functions listed below.

Remote control of the TV, DVD player, and VCR using this remote control

See pages 34 and 35 for details.

Aim the remote control directly at the remote sensor on each component.

One-touch video play

Simply by inserting a video cassette without its safety tab into the VCR, you can enjoy the video playback without setting other switches manually. The receiver automatically turns on and changes the source to “VCR” (or “VCR DIGITAL”).

The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture. When you insert a video cassette with its safety tab, press the play (3) button on the VCR or on the remote control. So, you can get the same result.

One-touch DVD play

Simply by starting playback on the DVD player, you can enjoy the DVD playback without setting other switches manually.

When the DVD player is connected through the analog input jacks on this receiver (and analog input is selected), the receiver automatically turns on and changes the source to “DVR/DVD” or “DVD MULTI.”

When the DVD player is connected through the digital input terminal on this receiver (and digital input is selected), the receiver automatically turns on and changes the source to

“DVR/DVD DGT.”

The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

Automatic selection of TV’s input mode

When you select “TV” (or “TV DIGITAL”) as the source to play on the receiver, the TV automatically changes the input mode to the TV tuner so that you can watch TV.

When you select “DVR/DVD” (or “DVR/DVD DGT”), “DVD MULTI,” “VCR” (or “VCR DIGITAL”), or “DBS” (or “DBS DIGITAL”) as the source to play on the receiver, the TV automatically changes the input mode to the appropriate position (either video input 1 or video input 2) so that you can view the playback picture.

NOTE

This function does not work when you connect this receiver and the TV with the AV COMPU LINK EX terminal using a component video cable. In this case, reconnect the TV referring to Case 1 or Case 2 on page 32.

Automatic power on/off

The TV, DVD player, and VCR turn on and off along with the receiver.

When you turn on the receiver;

If the previously selected source is “TV” (or “TV DIGITAL”) or “DBS” (or “DBS DIGITAL”), only the TV will turn on automatically.

If the previously selected source is “DVR/DVD” (or “DVR/DVD DGT”) or “DVD MULTI,” the TV and DVD player will turn on automatically.

If the previously selected source is “VCR” (or “VCR DIGITAL”),

the TV and VCR will turn on automatically.

When you turn off the receiver, the TV, DVD player, and VCR will turn off.

NOTE

If you turn off the receiver while recording on the VCR, the VCR will not turn off, but continue recording.

AV COMPU LINK remote control system

33

Image 35
Contents For Customer Use RX-F10SFor U.S.A For Canada/pour Le CanadaFor Canada/pour le Canada Table of Contents Parts identification Remote controlRear panel Front panelDisplay window Getting started Before InstallationPutting batteries in the remote control Checking the supplied accessoriesFM antenna connection Connecting the FM and AM antennasAM antenna connection Connecting the powered subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the speakersOnly for DVD recorder To S-video input Connecting video componentsTurn off all components before making connections Not suppliedAbout DVD Multi Green Blue RedWhite Connecting a TV Connecting a DBS tunerDigital output terminal Connecting the power cordDigital connection Digital input terminalsBasic operations Turn on the powerTo turn off the power into standby Selecting the analog or digital input modeListening with headphones Adjust the volumeSelecting the digital decode mode AUDIO/TV/VCR/DBS Adjusting the subwoofer audio positionActivating TV Direct Press TV DirectTurning off the sounds temporarily Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displayTake your position where you listen to Sound Basic settingsFrom the remote control only Basic setting items Setting subwoofer information-SUBWOOFER Operating procedureSetting the speakers Setting the crossover frequency-CROSS Over Setting bass soundSetting the speaker distance Setting subwoofer output-SUBWFR OUTSelecting the main or sub channel Using the Midnight modeVCR Compnt Auto SR onAuto Sroff VCR S/CTurn Multi JOG to adjust the selected item Sound adjustmentsBasic adjustment items Press AdjustAdjusting the center tone-CENTER Tone Adjusting speaker output levelAdjusting the effect level for DSP modes-EFFECT Reinforcing the bass-BASS Boost Adjusting the bass soundsAttenuating the input signal-INPUT ATT Selecting the subwoofer sound phase-SBWFRTuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsPress Tuner Preset Selecting the FM reception modeTo tune in a preset station From the remote control Press FM/AM to select the bandDolby Digital Creating realistic sound fieldsReproducing theater ambience Introducing the Surround modesDTS 3D Headphone modeAbout other digital signals Digital Acoustic Processor DAP modes All Channel Stereo mode ALL CH STIntroducing the DSP modes Virtual Surround Back Using the Surround/DSP modesPress Surround Turn Multi JOG to select the Surround/DSP mode you wantTo cancel Surround/DSP modes Select and play any source other than DVD MultiCase AV Compu Link remote control systemConnections 1 AV Compu Link connection Connections 2 Video cable connectionOne-touch video play Connecting procedureAutomatic selection of TV’s input mode Automatic power on/offREC Pause Operating other JVC productsVCR Channel +Zoom DVD recorder or DVD playerDVR/DVD TOP MENU/MENUTry to operate your TV by pressing TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Release TVManufacturers’ codes for VCR Changing the transmittable signals for operating a VCRRelease VCR Try to operate your VCR by pressing VCRRelease DVR/DVD Release DBSManufacturers’ codes for Catv converter Manufacturers’ codes for DBS tunerProblem Possible Cause Solution TroubleshootingAM tuner SpecificationsAmplifier FM tuner IHFLimited Warranty Authorized Service Centers RX-F10S Home Theater Receiver Recepteur Pour Cinema Maison Mises en garde, précautions et indications diverses English Parts identification Front panel Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components Green Blue Red White Red DBS tuner Composite video cable not supplied You can connect any digital componens which have an optical Basic operations Adjust the volume Position Adjusting the subwoofer audioTurning off the sounds temporarily Basic settings Basic setting items 12 cm Setting the crossover frequency-CROSS Over Dual Mono Setting Auto Surround-AUTO Surrnd Sound adjustments Surround/DSP modes Adjusting the sound parameters forAdjusting the effect level for DSP modes-EFFECT Adjusting the bass sounds From the remote control only Press the numeric buttons 1 10, +10 to Plii Music Pro Logic II Movie Plii Movie and Pro Logic II Music PliiPlii Movie English Introducing the DSP modes SML/LRG AUTO/ON EX/ES settingActivating the Surround/DSP modes AV Compu Link remote control system Connecting procedure Operating other JVC products Dimmer CancelReturn DVD/CARDProducts Operating otherManufacturers’ English Release DBS Troubleshooting Power Requirements AC 120 V , 60 Hz Power Consumption EN, FR Victor Company of JAPAN, Limited 0404MWMMDWJEIN

RX-F10S specifications

The JVC RX-F10S is an impressive home theater receiver that embodies a blend of power, versatility, and advanced technology. Designed to enhance the audio-visual experience, this receiver offers a suite of features that cater to both casual listeners and audiophiles alike.

At the heart of the RX-F10S is its robust amplification system, delivering a powerful output that ensures high-quality sound reproduction across a wide range of frequencies. With multiple channels for surround sound support, it allows users to create an immersive audio environment, perfect for movie-watching or music enjoyment. The receiver supports various surround sound formats, such as Dolby Digital and DTS, enabling a cinematic experience right in the comfort of one's living room.

One of the standout features of the RX-F10S is its connectivity options. It is equipped with multiple HDMI inputs that support the latest 4K Ultra HD and HDR pass-through. This ensures compatibility with the latest gaming consoles, Blu-ray players, and streaming devices, providing future-proofing for your entertainment setup. In addition to HDMI, the receiver also includes optical and coaxial digital inputs, along with several analog inputs, providing flexibility in connecting various audio sources.

The RX-F10S is designed with user convenience in mind. Its intuitive on-screen interface simplifies the setup process and allows users to easily navigate through settings and options. The inclusion of a remote control further enhances usability, making it easy to switch between audio sources and adjust sound settings without getting up.

Another notable aspect of the JVC RX-F10S is its compatibility with wireless technologies. It features built-in Bluetooth that allows for seamless streaming from smartphones, tablets, and other compatible devices. This adds an extra layer of convenience, enabling users to enjoy their favorite music without the hassle of physical connections.

In terms of sound customization, the RX-F10S includes an equalizer that allows listeners to adjust their audio preferences according to their taste or the acoustics of their room. This level of personalization is crucial for those who seek a tailored listening experience.

Overall, the JVC RX-F10S is a versatile home theater receiver that combines powerful performance with a wide array of connectivity options and advanced features. Its ability to deliver high-quality sound while being user-friendly makes it an excellent choice for anyone looking to upgrade their home entertainment setup. Whether you are watching movies, playing games, or listening to music, the RX-F10S is poised to elevate your audio experience to new heights.